Lines Matching +full:serial +full:- +full:pins
1 // SPDX-License-Identifier: GPL-2.0-or-later
3 * at91sam9rl.dtsi - Device Tree Include file for AT91SAM9RL family SoC
6 * Alexandre Belloni <alexandre.belloni@free-electrons.com>
9 #include <dt-bindings/pinctrl/at91.h>
10 #include <dt-bindings/clock/at91.h>
11 #include <dt-bindings/interrupt-controller/irq.h>
12 #include <dt-bindings/gpio/gpio.h>
13 #include <dt-bindings/pwm/pwm.h>
16 #address-cells = <1>;
17 #size-cells = <1>;
20 interrupt-parent = <&aic>;
41 #address-cells = <1>;
42 #size-cells = <0>;
45 compatible = "arm,arm926ej-s";
58 compatible = "fixed-clock";
59 #clock-cells = <0>;
60 clock-frequency = <0>;
64 compatible = "fixed-clock";
65 #clock-cells = <0>;
66 clock-frequency = <0>;
70 compatible = "fixed-clock";
71 #clock-cells = <0>;
72 clock-frequency = <1000000>;
77 compatible = "mmio-sram";
79 #address-cells = <1>;
80 #size-cells = <1>;
85 compatible = "simple-bus";
86 #address-cells = <1>;
87 #size-cells = <1>;
91 compatible = "atmel,at91sam9rl-lcdc";
94 pinctrl-names = "default";
95 pinctrl-0 = <&pinctrl_fb>;
97 clock-names = "hclk", "lcdc_clk";
102 compatible = "atmel,at91sam9rl-ebi";
103 #address-cells = <2>;
104 #size-cells = <1>;
117 nand_controller: nand-controller {
118 compatible = "atmel,at91sam9g45-nand-controller";
119 #address-cells = <2>;
120 #size-cells = <1>;
127 compatible = "simple-bus";
128 #address-cells = <1>;
129 #size-cells = <1>;
133 compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
134 #address-cells = <1>;
135 #size-cells = <0>;
141 clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
148 #address-cells = <1>;
149 #size-cells = <0>;
150 pinctrl-names = "default";
152 clock-names = "mci_clk";
157 compatible = "atmel,at91sam9260-i2c";
160 #address-cells = <1>;
161 #size-cells = <0>;
167 compatible = "atmel,at91sam9260-i2c";
170 #address-cells = <1>;
171 #size-cells = <0>;
175 usart0: serial@fffb0000 {
176 compatible = "atmel,at91sam9260-usart";
179 atmel,use-dma-rx;
180 atmel,use-dma-tx;
181 pinctrl-names = "default";
182 pinctrl-0 = <&pinctrl_usart0>;
184 clock-names = "usart";
188 usart1: serial@fffb4000 {
189 compatible = "atmel,at91sam9260-usart";
192 atmel,use-dma-rx;
193 atmel,use-dma-tx;
194 pinctrl-names = "default";
195 pinctrl-0 = <&pinctrl_usart1>;
197 clock-names = "usart";
201 usart2: serial@fffb8000 {
202 compatible = "atmel,at91sam9260-usart";
205 atmel,use-dma-rx;
206 atmel,use-dma-tx;
207 pinctrl-names = "default";
208 pinctrl-0 = <&pinctrl_usart2>;
210 clock-names = "usart";
214 usart3: serial@fffbc000 {
215 compatible = "atmel,at91sam9260-usart";
218 atmel,use-dma-rx;
219 atmel,use-dma-tx;
220 pinctrl-names = "default";
221 pinctrl-0 = <&pinctrl_usart3>;
223 clock-names = "usart";
228 compatible = "atmel,at91sam9rl-ssc";
231 pinctrl-names = "default";
232 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
237 compatible = "atmel,at91sam9rl-ssc";
240 pinctrl-names = "default";
241 pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
246 compatible = "atmel,at91sam9rl-pwm";
249 #pwm-cells = <3>;
251 clock-names = "pwm_clk";
256 #address-cells = <1>;
257 #size-cells = <0>;
258 compatible = "atmel,at91rm9200-spi";
261 pinctrl-names = "default";
262 pinctrl-0 = <&pinctrl_spi0>;
264 clock-names = "spi_clk";
269 #address-cells = <1>;
270 #size-cells = <0>;
271 compatible = "atmel,at91sam9rl-adc";
275 clock-names = "adc_clk", "adc_op_clk";
276 atmel,adc-use-external-triggers;
277 atmel,adc-channels-used = <0x3f>;
278 atmel,adc-vref = <3300>;
279 atmel,adc-startup-time = <40>;
280 atmel,adc-res = <8 10>;
281 atmel,adc-res-names = "lowres", "highres";
282 atmel,adc-use-res = "highres";
285 trigger-name = "timer-counter-0";
286 trigger-value = <0x1>;
289 trigger-name = "timer-counter-1";
290 trigger-value = <0x3>;
294 trigger-name = "timer-counter-2";
295 trigger-value = <0x5>;
299 trigger-name = "external";
300 trigger-value = <0x13>;
301 trigger-external;
306 compatible = "atmel,at91sam9rl-udc";
311 clock-names = "pclk", "hclk";
315 dma0: dma-controller@ffffe600 {
316 compatible = "atmel,at91sam9rl-dma";
319 #dma-cells = <2>;
321 clock-names = "dma_clk";
325 compatible = "atmel,at91sam9260-sdramc";
330 compatible = "atmel,at91sam9260-smc", "syscon";
335 compatible = "atmel,at91sam9rl-matrix", "syscon";
339 aic: interrupt-controller@fffff000 {
340 #interrupt-cells = <3>;
341 compatible = "atmel,at91rm9200-aic";
342 interrupt-controller;
344 atmel,external-irqs = <31>;
347 dbgu: serial@fffff200 {
348 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
351 pinctrl-names = "default";
352 pinctrl-0 = <&pinctrl_dbgu>;
354 clock-names = "usart";
359 #address-cells = <1>;
360 #size-cells = <1>;
361 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
364 atmel,mux-mask =
373 pinctrl_adc0_ts: adc0_ts-0 {
374 atmel,pins =
381 pinctrl_adc0_ad0: adc0_ad0-0 {
382 atmel,pins = <AT91_PIOA 17 AT91_PERIPH_A AT91_PINCTRL_NONE>;
385 pinctrl_adc0_ad1: adc0_ad1-0 {
386 atmel,pins = <AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
389 pinctrl_adc0_ad2: adc0_ad2-0 {
390 atmel,pins = <AT91_PIOA 19 AT91_PERIPH_A AT91_PINCTRL_NONE>;
393 pinctrl_adc0_ad3: adc0_ad3-0 {
394 atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>;
397 pinctrl_adc0_ad4: adc0_ad4-0 {
398 atmel,pins = <AT91_PIOD 6 AT91_PERIPH_A AT91_PINCTRL_NONE>;
401 pinctrl_adc0_ad5: adc0_ad5-0 {
402 atmel,pins = <AT91_PIOD 7 AT91_PERIPH_A AT91_PINCTRL_NONE>;
405 pinctrl_adc0_adtrg: adc0_adtrg-0 {
406 atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;
411 pinctrl_dbgu: dbgu-0 {
412 atmel,pins =
419 pinctrl_ebi_addr_nand: ebi-addr-0 {
420 atmel,pins =
427 pinctrl_fb: fb-0 {
428 atmel,pins =
454 pinctrl_i2c_gpio0: i2c_gpio0-0 {
455 atmel,pins =
462 pinctrl_i2c_gpio1: i2c_gpio1-0 {
463 atmel,pins =
470 pinctrl_mmc0_clk: mmc0_clk-0 {
471 atmel,pins =
475 pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
476 atmel,pins =
481 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
482 atmel,pins =
490 pinctrl_nand_rb: nand-rb-0 {
491 atmel,pins =
495 pinctrl_nand_cs: nand-cs-0 {
496 atmel,pins =
500 pinctrl_nand_oe_we: nand-oe-we-0 {
501 atmel,pins =
508 pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
509 atmel,pins = <AT91_PIOB 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
512 pinctrl_pwm0_pwm0_1: pwm0_pwm0-1 {
513 atmel,pins = <AT91_PIOC 2 AT91_PERIPH_B AT91_PINCTRL_NONE>;
516 pinctrl_pwm0_pwm0_2: pwm0_pwm0-2 {
517 atmel,pins = <AT91_PIOD 14 AT91_PERIPH_B AT91_PINCTRL_NONE>;
520 pinctrl_pwm0_pwm1_0: pwm0_pwm1-0 {
521 atmel,pins = <AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE>;
524 pinctrl_pwm0_pwm1_1: pwm0_pwm1-1 {
525 atmel,pins = <AT91_PIOC 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
528 pinctrl_pwm0_pwm1_2: pwm0_pwm1-2 {
529 atmel,pins = <AT91_PIOD 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
532 pinctrl_pwm0_pwm2_0: pwm0_pwm2-0 {
533 atmel,pins = <AT91_PIOD 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
536 pinctrl_pwm0_pwm2_1: pwm0_pwm2-1 {
537 atmel,pins = <AT91_PIOD 12 AT91_PERIPH_A AT91_PINCTRL_NONE>;
540 pinctrl_pwm0_pwm2_2: pwm0_pwm2-2 {
541 atmel,pins = <AT91_PIOD 16 AT91_PERIPH_B AT91_PINCTRL_NONE>;
544 pinctrl_pwm0_pwm3_0: pwm0_pwm3-0 {
545 atmel,pins = <AT91_PIOD 8 AT91_PERIPH_B AT91_PINCTRL_NONE>;
548 pinctrl_pwm0_pwm3_1: pwm0_pwm3-1 {
549 atmel,pins = <AT91_PIOD 18 AT91_PERIPH_A AT91_PINCTRL_NONE>;
554 pinctrl_spi0: spi0-0 {
555 atmel,pins =
563 pinctrl_ssc0_tx: ssc0_tx-0 {
564 atmel,pins =
570 pinctrl_ssc0_rx: ssc0_rx-0 {
571 atmel,pins =
579 pinctrl_ssc1_tx: ssc1_tx-0 {
580 atmel,pins =
586 pinctrl_ssc1_rx: ssc1_rx-0 {
587 atmel,pins =
595 pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
596 atmel,pins = <AT91_PIOA 3 AT91_PERIPH_B AT91_PINCTRL_NONE>;
599 pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
600 atmel,pins = <AT91_PIOC 31 AT91_PERIPH_B AT91_PINCTRL_NONE>;
603 pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
604 atmel,pins = <AT91_PIOD 21 AT91_PERIPH_A AT91_PINCTRL_NONE>;
607 pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
608 atmel,pins = <AT91_PIOA 4 AT91_PERIPH_B AT91_PINCTRL_NONE>;
611 pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
612 atmel,pins = <AT91_PIOC 29 AT91_PERIPH_B AT91_PINCTRL_NONE>;
615 pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
616 atmel,pins = <AT91_PIOD 10 AT91_PERIPH_B AT91_PINCTRL_NONE>;
619 pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
620 atmel,pins = <AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>;
623 pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
624 atmel,pins = <AT91_PIOC 30 AT91_PERIPH_B AT91_PINCTRL_NONE>;
627 pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
628 atmel,pins = <AT91_PIOD 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;
633 pinctrl_usart0: usart0-0 {
634 atmel,pins =
639 pinctrl_usart0_rts: usart0_rts-0 {
640 atmel,pins =
644 pinctrl_usart0_cts: usart0_cts-0 {
645 atmel,pins =
649 pinctrl_usart0_dtr_dsr: usart0_dtr_dsr-0 {
650 atmel,pins =
655 pinctrl_usart0_dcd: usart0_dcd-0 {
656 atmel,pins =
660 pinctrl_usart0_ri: usart0_ri-0 {
661 atmel,pins =
665 pinctrl_usart0_sck: usart0_sck-0 {
666 atmel,pins =
672 pinctrl_usart1: usart1-0 {
673 atmel,pins =
678 pinctrl_usart1_rts: usart1_rts-0 {
679 atmel,pins =
683 pinctrl_usart1_cts: usart1_cts-0 {
684 atmel,pins =
688 pinctrl_usart1_sck: usart1_sck-0 {
689 atmel,pins =
695 pinctrl_usart2: usart2-0 {
696 atmel,pins =
701 pinctrl_usart2_rts: usart2_rts-0 {
702 atmel,pins =
706 pinctrl_usart2_cts: usart2_cts-0 {
707 atmel,pins =
711 pinctrl_usart2_sck: usart2_sck-0 {
712 atmel,pins =
718 pinctrl_usart3: usart3-0 {
719 atmel,pins =
724 pinctrl_usart3_rts: usart3_rts-0 {
725 atmel,pins =
729 pinctrl_usart3_cts: usart3_cts-0 {
730 atmel,pins =
734 pinctrl_usart3_sck: usart3_sck-0 {
735 atmel,pins =
741 compatible = "atmel,at91rm9200-gpio";
744 #gpio-cells = <2>;
745 gpio-controller;
746 interrupt-controller;
747 #interrupt-cells = <2>;
752 compatible = "atmel,at91rm9200-gpio";
755 #gpio-cells = <2>;
756 gpio-controller;
757 interrupt-controller;
758 #interrupt-cells = <2>;
763 compatible = "atmel,at91rm9200-gpio";
766 #gpio-cells = <2>;
767 gpio-controller;
768 interrupt-controller;
769 #interrupt-cells = <2>;
774 compatible = "atmel,at91rm9200-gpio";
777 #gpio-cells = <2>;
778 gpio-controller;
779 interrupt-controller;
780 #interrupt-cells = <2>;
786 compatible = "atmel,at91sam9rl-pmc", "syscon";
789 #clock-cells = <2>;
791 clock-names = "slow_clk", "main_xtal";
795 compatible = "atmel,at91sam9260-rstc";
801 compatible = "atmel,at91sam9260-shdwc";
807 compatible = "atmel,at91sam9260-pit";
814 compatible = "atmel,at91sam9260-wdt";
822 compatible = "atmel,at91sam9x5-sckc";
825 #clock-cells = <0>;
829 compatible = "atmel,at91sam9260-rtt";
837 compatible = "atmel,at91sam9260-gpbr", "syscon";
843 compatible = "atmel,at91rm9200-rtc";
853 i2c-gpio-0 {
854 compatible = "i2c-gpio";
857 i2c-gpio,sda-open-drain;
858 i2c-gpio,scl-open-drain;
859 i2c-gpio,delay-us = <2>; /* ~100 kHz */
860 #address-cells = <1>;
861 #size-cells = <0>;
862 pinctrl-names = "default";
863 pinctrl-0 = <&pinctrl_i2c_gpio0>;
867 i2c-gpio-1 {
868 compatible = "i2c-gpio";
871 i2c-gpio,sda-open-drain;
872 i2c-gpio,scl-open-drain;
873 i2c-gpio,delay-us = <2>; /* ~100 kHz */
874 #address-cells = <1>;
875 #size-cells = <0>;
876 pinctrl-names = "default";
877 pinctrl-0 = <&pinctrl_i2c_gpio1>;