Lines Matching +full:scl +full:- +full:open +full:- +full:drain
1 // SPDX-License-Identifier: GPL-2.0-only
3 * at91sam9263.dtsi - Device Tree Include file for AT91SAM9263 family SoC
5 * Copyright (C) 2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
8 #include <dt-bindings/pinctrl/at91.h>
9 #include <dt-bindings/interrupt-controller/irq.h>
10 #include <dt-bindings/gpio/gpio.h>
11 #include <dt-bindings/clock/at91.h>
14 #address-cells = <1>;
15 #size-cells = <1>;
18 interrupt-parent = <&aic>;
38 #address-cells = <1>;
39 #size-cells = <0>;
42 compatible = "arm,arm926ej-s";
55 compatible = "fixed-clock";
56 #clock-cells = <0>;
57 clock-frequency = <0>;
61 compatible = "fixed-clock";
62 #clock-cells = <0>;
63 clock-frequency = <0>;
68 compatible = "mmio-sram";
70 #address-cells = <1>;
71 #size-cells = <1>;
76 compatible = "mmio-sram";
78 #address-cells = <1>;
79 #size-cells = <1>;
84 compatible = "simple-bus";
85 #address-cells = <1>;
86 #size-cells = <1>;
90 compatible = "simple-bus";
91 #address-cells = <1>;
92 #size-cells = <1>;
95 aic: interrupt-controller@fffff000 {
96 #interrupt-cells = <3>;
97 compatible = "atmel,at91rm9200-aic";
98 interrupt-controller;
100 atmel,external-irqs = <30 31>;
104 compatible = "atmel,at91sam9263-pmc", "syscon";
107 #clock-cells = <2>;
109 clock-names = "slow_xtal", "main_xtal";
113 compatible = "atmel,at91sam9260-sdramc";
118 compatible = "atmel,at91sam9260-smc", "syscon";
123 compatible = "atmel,at91sam9260-sdramc";
128 compatible = "atmel,at91sam9260-smc", "syscon";
133 compatible = "atmel,at91sam9263-matrix", "syscon";
138 compatible = "atmel,at91sam9260-pit";
145 compatible = "atmel,at91rm9200-tcb", "simple-mfd", "syscon";
146 #address-cells = <1>;
147 #size-cells = <0>;
151 clock-names = "t0_clk", "slow_clk";
155 compatible = "atmel,at91sam9260-rstc";
161 compatible = "atmel,at91sam9260-shdwc";
167 #address-cells = <1>;
168 #size-cells = <1>;
169 compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
172 atmel,mux-mask = <
183 pinctrl_dbgu: dbgu-0 {
191 pinctrl_usart0: usart0-0 {
197 pinctrl_usart0_rts: usart0_rts-0 {
202 pinctrl_usart0_cts: usart0_cts-0 {
209 pinctrl_usart1: usart1-0 {
215 pinctrl_usart1_rts: usart1_rts-0 {
220 pinctrl_usart1_cts: usart1_cts-0 {
227 pinctrl_usart2: usart2-0 {
233 pinctrl_usart2_rts: usart2_rts-0 {
238 pinctrl_usart2_cts: usart2_cts-0 {
245 pinctrl_nand_rb: nand-rb-0 {
250 pinctrl_nand_cs: nand-cs-0 {
257 pinctrl_macb_rmii: macb_rmii-0 {
271 pinctrl_macb_rmii_mii: macb_rmii_mii-0 {
285 pinctrl_mmc0_clk: mmc0_clk-0 {
290 pinctrl_mmc0_slot0_cmd_dat0: mmc0_slot0_cmd_dat0-0 {
296 pinctrl_mmc0_slot0_dat1_3: mmc0_slot0_dat1_3-0 {
303 pinctrl_mmc0_slot1_cmd_dat0: mmc0_slot1_cmd_dat0-0 {
309 pinctrl_mmc0_slot1_dat1_3: mmc0_slot1_dat1_3-0 {
318 pinctrl_mmc1_clk: mmc1_clk-0 {
323 pinctrl_mmc1_slot0_cmd_dat0: mmc1_slot0_cmd_dat0-0 {
329 pinctrl_mmc1_slot0_dat1_3: mmc1_slot0_dat1_3-0 {
336 pinctrl_mmc1_slot1_cmd_dat0: mmc1_slot1_cmd_dat0-0 {
342 pinctrl_mmc1_slot1_dat1_3: mmc1_slot1_dat1_3-0 {
351 pinctrl_ssc0_tx: ssc0_tx-0 {
358 pinctrl_ssc0_rx: ssc0_rx-0 {
367 pinctrl_ssc1_tx: ssc1_tx-0 {
374 pinctrl_ssc1_rx: ssc1_rx-0 {
383 pinctrl_spi0: spi0-0 {
392 pinctrl_spi1: spi1-0 {
401 pinctrl_tcb0_tclk0: tcb0_tclk0-0 {
405 pinctrl_tcb0_tclk1: tcb0_tclk1-0 {
409 pinctrl_tcb0_tclk2: tcb0_tclk2-0 {
413 pinctrl_tcb0_tioa0: tcb0_tioa0-0 {
417 pinctrl_tcb0_tioa1: tcb0_tioa1-0 {
421 pinctrl_tcb0_tioa2: tcb0_tioa2-0 {
425 pinctrl_tcb0_tiob0: tcb0_tiob0-0 {
429 pinctrl_tcb0_tiob1: tcb0_tiob1-0 {
433 pinctrl_tcb0_tiob2: tcb0_tiob2-0 {
439 pinctrl_fb: fb-0 {
475 pinctrl_ac97: ac97-0 {
485 compatible = "atmel,at91rm9200-gpio";
488 #gpio-cells = <2>;
489 gpio-controller;
490 interrupt-controller;
491 #interrupt-cells = <2>;
496 compatible = "atmel,at91rm9200-gpio";
499 #gpio-cells = <2>;
500 gpio-controller;
501 interrupt-controller;
502 #interrupt-cells = <2>;
507 compatible = "atmel,at91rm9200-gpio";
510 #gpio-cells = <2>;
511 gpio-controller;
512 interrupt-controller;
513 #interrupt-cells = <2>;
518 compatible = "atmel,at91rm9200-gpio";
521 #gpio-cells = <2>;
522 gpio-controller;
523 interrupt-controller;
524 #interrupt-cells = <2>;
529 compatible = "atmel,at91rm9200-gpio";
532 #gpio-cells = <2>;
533 gpio-controller;
534 interrupt-controller;
535 #interrupt-cells = <2>;
541 compatible = "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart";
544 pinctrl-names = "default";
545 pinctrl-0 = <&pinctrl_dbgu>;
547 clock-names = "usart";
552 compatible = "atmel,at91sam9260-usart";
555 atmel,use-dma-rx;
556 atmel,use-dma-tx;
557 pinctrl-names = "default";
558 pinctrl-0 = <&pinctrl_usart0>;
560 clock-names = "usart";
565 compatible = "atmel,at91sam9260-usart";
568 atmel,use-dma-rx;
569 atmel,use-dma-tx;
570 pinctrl-names = "default";
571 pinctrl-0 = <&pinctrl_usart1>;
573 clock-names = "usart";
578 compatible = "atmel,at91sam9260-usart";
581 atmel,use-dma-rx;
582 atmel,use-dma-tx;
583 pinctrl-names = "default";
584 pinctrl-0 = <&pinctrl_usart2>;
586 clock-names = "usart";
591 compatible = "atmel,at91rm9200-ssc";
594 pinctrl-names = "default";
595 pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
597 clock-names = "pclk";
602 compatible = "atmel,at91rm9200-ssc";
605 pinctrl-names = "default";
606 pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
608 clock-names = "pclk";
613 compatible = "atmel,at91sam9263-ac97c";
616 pinctrl-names = "default";
617 pinctrl-0 = <&pinctrl_ac97>;
619 clock-names = "ac97_clk";
624 compatible = "cdns,at91sam9260-macb", "cdns,macb";
627 pinctrl-names = "default";
628 pinctrl-0 = <&pinctrl_macb_rmii>;
630 clock-names = "hclk", "pclk";
635 compatible = "atmel,at91sam9263-udc";
639 clock-names = "pclk", "hclk";
644 compatible = "atmel,at91sam9260-i2c";
647 #address-cells = <1>;
648 #size-cells = <0>;
657 #address-cells = <1>;
658 #size-cells = <0>;
660 clock-names = "mci_clk";
668 #address-cells = <1>;
669 #size-cells = <0>;
671 clock-names = "mci_clk";
676 compatible = "atmel,at91sam9260-wdt";
680 atmel,watchdog-type = "hardware";
681 atmel,reset-type = "all";
682 atmel,dbg-halt;
687 #address-cells = <1>;
688 #size-cells = <0>;
689 compatible = "atmel,at91rm9200-spi";
692 pinctrl-names = "default";
693 pinctrl-0 = <&pinctrl_spi0>;
695 clock-names = "spi_clk";
700 #address-cells = <1>;
701 #size-cells = <0>;
702 compatible = "atmel,at91rm9200-spi";
705 pinctrl-names = "default";
706 pinctrl-0 = <&pinctrl_spi1>;
708 clock-names = "spi_clk";
713 compatible = "atmel,at91sam9rl-pwm";
716 #pwm-cells = <3>;
718 clock-names = "pwm_clk";
723 compatible = "atmel,at91sam9263-can";
726 pinctrl-names = "default";
727 pinctrl-0 = <&pinctrl_can_rx_tx>;
729 clock-names = "can_clk";
733 compatible = "atmel,at91sam9260-rtt";
741 compatible = "atmel,at91sam9260-rtt";
749 compatible = "atmel,at91sam9260-gpbr", "syscon";
756 compatible = "atmel,at91sam9263-lcdc";
759 pinctrl-names = "default";
760 pinctrl-0 = <&pinctrl_fb>;
762 clock-names = "lcdc_clk", "hclk";
767 compatible = "atmel,at91rm9200-ohci", "usb-ohci";
771 clock-names = "ohci_clk", "hclk", "uhpck";
776 compatible = "atmel,at91sam9263-ebi0";
777 #address-cells = <2>;
778 #size-cells = <1>;
791 nand_controller0: nand-controller {
792 compatible = "atmel,at91sam9260-nand-controller";
793 #address-cells = <2>;
794 #size-cells = <1>;
801 compatible = "atmel,at91sam9263-ebi1";
802 #address-cells = <2>;
803 #size-cells = <1>;
812 nand_controller1: nand-controller {
813 compatible = "atmel,at91sam9260-nand-controller";
814 #address-cells = <2>;
815 #size-cells = <1>;
822 i2c-gpio-0 {
823 compatible = "i2c-gpio";
825 &pioB 5 GPIO_ACTIVE_HIGH /* scl */
827 i2c-gpio,sda-open-drain;
828 i2c-gpio,scl-open-drain;
829 i2c-gpio,delay-us = <2>; /* ~100 kHz */
830 #address-cells = <1>;
831 #size-cells = <0>;