Lines Matching +full:bias +full:- +full:disable
1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 * at91-sama5d27_som1_ek.dts - Device Tree file for SAMA5D27-SOM1-EK board
10 /dts-v1/;
11 #include "at91-sama5d27_som1.dtsi"
12 #include <dt-bindings/mfd/atmel-flexcom.h>
13 #include <dt-bindings/gpio/gpio.h>
17 …compatible = "atmel,sama5d27-som1-ek", "atmel,sama5d27-som1", "atmel,sama5d27", "atmel,sama5d2", "…
28 stdout-path = "serial0:115200n8";
33 atmel,vbus-gpio = <&pioA PIN_PD20 GPIO_ACTIVE_HIGH>;
34 pinctrl-names = "default";
35 pinctrl-0 = <&pinctrl_usba_vbus>;
40 num-ports = <3>;
41 atmel,vbus-gpio = <0 /* &pioA PIN_PD20 GPIO_ACTIVE_HIGH */
45 pinctrl-names = "default";
46 pinctrl-0 = <&pinctrl_usb_default>;
54 sdmmc0: sdio-host@a0000000 {
55 bus-width = <8>;
56 mmc-ddr-3_3v;
57 pinctrl-names = "default";
58 pinctrl-0 = <&pinctrl_sdmmc0_default>;
62 sdmmc1: sdio-host@b0000000 {
63 bus-width = <4>;
64 pinctrl-names = "default";
65 pinctrl-0 = <&pinctrl_sdmmc1_default>;
71 pinctrl-names = "default";
72 …pinctrl-0 = <&pinctrl_isc_base &pinctrl_isc_data_8bit &pinctrl_isc_data_9_10 &pinctrl_isc_data_11_…
81 pinctrl-names = "default";
82 pinctrl-0 = <&pinctrl_spi0_default>;
92 compatible = "atmel,tcb-timer";
97 compatible = "atmel,tcb-timer";
103 pinctrl-names = "default";
104 pinctrl-0 = <&pinctrl_uart1_default>;
105 atmel,use-dma-rx;
106 atmel,use-dma-tx;
111 pinctrl-names = "default";
112 pinctrl-0 = <&pinctrl_mikrobus2_uart>;
113 atmel,use-dma-rx;
114 atmel,use-dma-tx;
119 pinctrl-names = "default";
120 pinctrl-0 = <&pinctrl_mikrobus1_pwm &pinctrl_mikrobus2_pwm>;
125 atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
130 i2c-analog-filter;
131 i2c-digital-filter;
132 i2c-digital-filter-width-ns = <35>;
133 pinctrl-names = "default";
134 pinctrl-0 = <&pinctrl_mikrobus_i2c>;
140 atmel,shdwc-debouncer = <976>;
141 atmel,wakeup-rtc-timer;
145 atmel,wakeup-type = "low";
154 atmel,use-dma-rx;
155 atmel,use-dma-tx;
156 pinctrl-names = "default";
157 pinctrl-0 = <&pinctrl_uart3_default>;
162 atmel,use-dma-rx;
163 atmel,use-dma-tx;
164 pinctrl-names = "default";
165 pinctrl-0 = <&pinctrl_mikrobus1_uart>;
170 atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
175 pinctrl-names = "default";
176 pinctrl-0 = <&pinctrl_flx3_default>;
182 pinctrl-names = "default";
183 pinctrl-0 = <&pinctrl_flx3_default>;
189 atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_SPI>;
194 pinctrl-names = "default";
195 pinctrl-0 = <&pinctrl_flx4_default>;
201 pinctrl-names = "default";
202 pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
208 pinctrl-names = "default";
209 pinctrl-0 = <&pinctrl_flx4_default>;
216 i2c-analog-filter;
217 i2c-digital-filter;
218 i2c-digital-filter-width-ns = <35>;
219 pinctrl-names = "default";
220 pinctrl-0 = <&pinctrl_i2c1_default>;
225 vddana-supply = <&vddana>;
226 vref-supply = <&advref>;
236 bias-disable;
245 bias-disable;
251 bias-disable;
259 bias-disable;
271 bias-disable;
277 bias-disable;
283 bias-disable;
288 bias-pull-up;
295 bias-pull-up;
309 bias-disable;
316 bias-disable;
327 bias-disable;
330 conf-ck_cd {
333 bias-disable;
342 bias-disable;
348 bias-disable;
354 bias-disable;
360 bias-disable;
365 bias-disable;
370 bias-disable;
375 bias-disable;
380 bias-disable;
385 bias-disable;
390 bias-disable;
395 bias-disable;
402 bias-disable;
407 bias-disable;
412 bias-disable;
417 bias-disable;
422 bias-disable;
428 bias-disable;
434 bias-disable;
440 bias-disable;
449 bias-disable;
454 pinctrl-names = "default";
455 pinctrl-0 = <&pinctrl_can1_default>;
462 compatible = "gpio-keys";
464 pinctrl-names = "default";
465 pinctrl-0 = <&pinctrl_key_gpio_default>;
471 wakeup-source;
476 compatible = "gpio-leds";
477 pinctrl-names = "default";
478 pinctrl-0 = <&pinctrl_led_gpio_default>;
494 linux,default-trigger = "heartbeat";
498 vddin_3v3: fixed-regulator-vddin_3v3 {
499 compatible = "regulator-fixed";
501 regulator-name = "VDDIN_3V3";
502 regulator-min-microvolt = <3300000>;
503 regulator-max-microvolt = <3300000>;
504 regulator-always-on;
505 regulator-boot-on;
509 vddana: fixed-regulator-vddana {
510 compatible = "regulator-fixed";
512 regulator-name = "VDDANA";
513 regulator-min-microvolt = <3300000>;
514 regulator-max-microvolt = <3300000>;
515 regulator-always-on;
516 regulator-boot-on;
517 vin-supply = <&vddin_3v3>;
521 advref: fixed-regulator-advref {
522 compatible = "regulator-fixed";
524 regulator-name = "advref";
525 regulator-min-microvolt = <3300000>;
526 regulator-max-microvolt = <3300000>;
527 regulator-always-on;
528 regulator-boot-on;
529 vin-supply = <&vddana>;