Lines Matching +full:regulator +full:- +full:max +full:- +full:step +full:- +full:microvolt

1 // SPDX-License-Identifier: GPL-2.0
3  * at91-kizbox2_common.dtsi - Device Tree Include file for
6  * Copyright (C) 2014-2018 Overkiz SAS
17 		stdout-path = &dbgu;
26 			clock-frequency = <32768>;
30 			clock-frequency = <12000000>;
35 		compatible = "gpio-keys";
36 		#address-cells = <1>;
37 		#size-cells = <0>;
43 			wakeup-source;
50 			wakeup-source;
57 			wakeup-source;
62 		compatible = "pwm-leds";
67 			max-brightness = <255>;
68 			linux,default-trigger = "none";
74 			max-brightness = <255>;
75 			linux,default-trigger = "default-on";
81 			max-brightness = <255>;
82 			linux,default-trigger = "default-on";
91 		compatible = "active-semi,act8865";
97 				regulator-name = "VCC_1V8";
98 				regulator-min-microvolt = <1800000>;
99 				regulator-max-microvolt = <1800000>;
100 				regulator-always-on;
104 				regulator-name = "VCC_1V2";
105 				regulator-min-microvolt = <1200000>;
106 				regulator-max-microvolt = <1200000>;
107 				regulator-always-on;
111 				regulator-name = "VCC_3V3";
112 				regulator-min-microvolt = <3300000>;
113 				regulator-max-microvolt = <3300000>;
114 				regulator-always-on;
118 				regulator-name = "FUSE_2V5";
119 				regulator-min-microvolt = <2500000>;
120 				regulator-max-microvolt = <2500000>;
124 				regulator-name = "VDDANA";
125 				regulator-min-microvolt = <3300000>;
126 				regulator-max-microvolt = <3300000>;
127 				regulator-always-on;
131 				regulator-name = "VLED";
132 				regulator-min-microvolt = <3300000>;
133 				regulator-max-microvolt = <3300000>;
134 				regulator-always-on;
138 				regulator-name = "V3V8_RF";
139 				regulator-min-microvolt = <3800000>;
140 				regulator-max-microvolt = <3800000>;
141 				regulator-always-on;
148 	atmel,use-dma-rx;
149 	atmel,use-dma-tx;
154 	atmel,use-dma-rx;
155 	atmel,use-dma-tx;
160 	atmel,use-dma-rx;
161 	atmel,use-dma-tx;
166 	pinctrl-names = "default";
167 	pinctrl-0 = <&pinctrl_pwm0_pwmh0_1
174 	atmel,adc-vref = <3333>;
179 	phy-mode = "rmii";
192 	pinctrl-0 = <&pinctrl_ebi_nand_addr>;
193 	pinctrl-names = "default";
203 		nand-bus-width = <8>;
204 		nand-ecc-mode = "hw";
205 		nand-ecc-strength = <4>;
206 		nand-ecc-step-size = <512>;
207 		nand-on-flash-bbt;
211 			compatible = "fixed-partitions";
212 			#address-cells = <1>;
213 			#size-cells = <1>;