Lines Matching +full:ast2500 +full:- +full:vuart
1 // SPDX-License-Identifier: GPL-2.0+
2 /dts-v1/;
3 #include "aspeed-g5.dtsi"
4 #include <dt-bindings/gpio/aspeed-gpio.h>
5 #include <dt-bindings/leds/leds-pca955x.h>
9 compatible = "inspur,fp5280g2-bmc", "aspeed,ast2500";
12 stdout-path = &uart5;
20 reserved-memory {
21 #address-cells = <1>;
22 #size-cells = <1>;
26 no-map;
31 no-map;
37 no-map;
43 compatible = "shared-dma-pool";
50 compatible = "shared-dma-pool";
55 fsi: gpio-fsi {
56 compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
57 #address-cells = <2>;
58 #size-cells = <0>;
59 no-gpio-delays;
61 memory-region = <&coldfire_memory>;
65 clock-gpios = <&gpio ASPEED_GPIO(AA, 0) GPIO_ACTIVE_HIGH>;
66 data-gpios = <&gpio ASPEED_GPIO(AA, 2) GPIO_ACTIVE_HIGH>;
67 mux-gpios = <&gpio ASPEED_GPIO(I, 2) GPIO_ACTIVE_HIGH>;
68 enable-gpios = <&gpio ASPEED_GPIO(I, 3) GPIO_ACTIVE_HIGH>;
69 trans-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_HIGH>;
72 gpio-keys {
73 compatible = "gpio-keys";
81 ps0-presence {
82 label = "ps0-presence";
87 ps1-presence {
88 label = "ps1-presence";
95 gpio-keys-polled {
96 compatible = "gpio-keys-polled";
97 poll-interval = <1000>;
99 fan0-presence {
100 label = "fan0-presence";
105 fan1-presence {
106 label = "fan1-presence";
111 fan2-presence {
112 label = "fan2-presence";
117 fan3-presence {
118 label = "fan3-presence";
123 fan4-presence {
124 label = "fan4-presence";
129 fan5-presence {
130 label = "fan5-presence";
135 fan6-presence {
136 label = "fan6-presence";
141 fan7-presence {
142 label = "fan7-presence";
149 compatible = "gpio-leds";
157 init-ok {
158 label = "init-ok";
162 front-memory {
163 label = "front-memory";
167 front-syshot {
168 label = "front-syshot";
172 front-syshealth {
173 label = "front-syshealth";
177 front-fan {
178 label = "front-fan";
182 front-psu {
183 label = "front-psu";
193 iio-hwmon-battery {
194 compatible = "iio-hwmon";
195 io-channels = <&adc 15>;
198 iio-hwmon {
199 compatible = "iio-hwmon";
200 io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
213 m25p,fast-read;
214 spi-max-frequency = <50000000>;
215 #include "openbmc-flash-layout.dtsi"
221 pinctrl-names = "default";
222 pinctrl-0 = <&pinctrl_spi1_default>;
227 m25p,fast-read;
228 spi-max-frequency = <100000000>;
233 /* Rear RS-232 connector */
235 pinctrl-names = "default";
236 pinctrl-0 = <&pinctrl_txd1_default
249 pinctrl-names = "default";
250 pinctrl-0 = <&pinctrl_txd2_default &pinctrl_rxd2_default>;
256 pinctrl-names = "default";
257 pinctrl-0 = <&pinctrl_txd3_default &pinctrl_rxd3_default>;
266 memory-region = <&flash_memory>;
272 pinctrl-names = "default";
273 pinctrl-0 = <&pinctrl_rmii1_default>;
276 clock-names = "MACCLK", "RCLK";
277 use-ncsi;
282 pinctrl-names = "default";
283 pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
317 i2c-switch@70 {
320 #address-cells = <1>;
321 #size-cells = <0>;
324 #address-cells = <1>;
325 #size-cells = <0>;
337 #address-cells = <1>;
338 #size-cells = <0>;
349 #address-cells = <1>;
350 #size-cells = <0>;
361 #address-cells = <1>;
362 #size-cells = <0>;
401 i2c-switch@70 {
404 #address-cells = <1>;
405 #size-cells = <0>;
408 #address-cells = <1>;
409 #size-cells = <0>;
445 #address-cells = <1>;
446 #size-cells = <0>;
448 gpio-controller;
449 #gpio-cells = <2>;
496 #address-cells = <1>;
497 #size-cells = <0>;
499 gpio-controller;
500 #gpio-cells = <2>;
546 #address-cells = <1>;
547 #size-cells = <0>;
549 gpio-controller;
550 #gpio-cells = <2>;
596 #address-cells = <1>;
597 #size-cells = <0>;
599 gpio-controller;
600 #gpio-cells = <2>;
646 #address-cells = <1>;
647 #size-cells = <0>;
649 gpio-controller;
650 #gpio-cells = <2>;
696 #address-cells = <1>;
697 #size-cells = <0>;
699 gpio-controller;
700 #gpio-cells = <2>;
758 power-supply@58 {
763 power-supply@59 {
774 &vuart {
780 memory-region = <&gfx_memory>;
784 aspeed,external-nodes = <&gfx &lhc>;
788 aspeed,reset-type = "none";
789 aspeed,external-signal;
790 aspeed,ext-push-pull;
791 aspeed,ext-active-high;
793 pinctrl-names = "default";
794 pinctrl-0 = <&pinctrl_wdtrst1_default>;
804 pinctrl-names = "default";
805 pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
819 memory-region = <&video_engine_memory>;
824 pinctrl-names = "default";
825 pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
832 aspeed,fan-tach-ch = /bits/ 8 <0x00 0x01>;
837 aspeed,fan-tach-ch = /bits/ 8 <0x02 0x03>;
842 aspeed,fan-tach-ch = /bits/ 8 <0x04 0x05>;
847 aspeed,fan-tach-ch = /bits/ 8 <0x06 0x07>;
852 aspeed,fan-tach-ch = /bits/ 8 <0x08 0x09>;
857 aspeed,fan-tach-ch = /bits/ 8 <0x0a 0x0b>;
862 aspeed,fan-tach-ch = /bits/ 8 <0x0c 0x0d>;
867 aspeed,fan-tach-ch = /bits/ 8 <0x0e 0x0f>;
872 #include "ibm-power9-dual.dtsi"