Lines Matching +full:mv78230 +full:- +full:i2c

1 // SPDX-License-Identifier: (GPL-2.0 OR MIT)
12 * Based on armada-xp-axpwifiap.dts:
16 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
19 /dts-v1/;
20 #include <dt-bindings/gpio/gpio.h>
21 #include <dt-bindings/input/input.h>
22 #include "armada-xp-mv78230.dtsi"
26 compatible = "linksys,mamba", "marvell,armadaxp-mv78230",
27 "marvell,armadaxp", "marvell,armada-370-xp";
31 stdout-path = &uart0;
46 internal-regs {
59 nr-ports = <1>;
64 pinctrl-0 = <&ge0_rgmii_pins>;
65 pinctrl-names = "default";
67 phy-mode = "rgmii-id";
68 buffer-manager = <&bm>;
69 bm,pool-long = <0>;
70 bm,pool-short = <1>;
71 fixed-link {
73 full-duplex;
78 pinctrl-0 = <&ge1_rgmii_pins>;
79 pinctrl-names = "default";
81 phy-mode = "rgmii-id";
82 buffer-manager = <&bm>;
83 bm,pool-long = <2>;
84 bm,pool-short = <3>;
85 fixed-link {
87 full-duplex;
96 i2c@11000 {
98 clock-frequency = <100000>;
106 #address-cells = <1>;
107 #size-cells = <0>;
108 #gpio-cells = <2>;
135 linux,default-trigger = "disk-activity";
170 bm-bppi {
176 compatible = "gpio-keys";
177 #address-cells = <1>;
178 #size-cells = <0>;
179 pinctrl-0 = <&keys_pin>;
180 pinctrl-names = "default";
195 gpio-leds {
196 compatible = "gpio-leds";
197 pinctrl-0 = <&power_led_pin>;
198 pinctrl-names = "default";
203 default-state = "on";
208 /* SUNON HA4010V4-0000-C99 */
210 compatible = "pwm-fan";
224 /* First mini-PCIe port */
230 /* Second mini-PCIe port */
239 keys_pin: keys-pin {
244 power_led_pin: power-led-pin {
249 gpio_fan_pin: gpio-fan-pin {
258 spi-flash@0 {
259 #address-cells = <1>;
260 #size-cells = <1>;
263 spi-max-frequency = <40000000>;
272 #address-cells = <1>;
273 #size-cells = <0>;
277 #address-cells = <1>;
278 #size-cells = <0>;
309 fixed-link {
311 full-duplex;
323 label = "pxa3xx_nand-0";
324 nand-rb = <0>;
325 marvell,nand-keep-config;
326 nand-on-flash-bbt;
327 nand-ecc-strength = <4>;
328 nand-ecc-step-size = <512>;
331 compatible = "fixed-partitions";
332 #address-cells = <1>;
333 #size-cells = <1>;
336 label = "u-boot";
338 read-only;
354 read-only;