Lines Matching +full:u +full:- +full:boot +full:- +full:spl
1 // SPDX-License-Identifier: GPL-2.0
3 * Copyright (C) 2012 Texas Instruments Incorporated - https://www.ti.com/
6 /dts-v1/;
9 #include <dt-bindings/input/input.h>
10 #include <dt-bindings/interrupt-controller/irq.h>
14 compatible = "bosch,am335x-guardian", "ti,am33xx";
17 stdout-path = &uart0;
18 tick-timer = &timer2;
23 cpu0-supply = <&dcdc2_reg>;
33 compatible = "gpio-keys";
34 #address-cells = <1>;
35 #size-cells = <0>;
36 pinctrl-names = "default";
37 pinctrl-0 = <&gpio_keys_pins>;
40 label = "guardian-power-button";
43 wakeup-source;
48 compatible = "gpio-leds";
49 pinctrl-names = "default";
50 pinctrl-0 = <&leds_pins>;
55 linux,default-trigger = "heartbeat";
56 default-state = "off";
62 linux,default-trigger = "mmc0";
63 default-state = "off";
69 pinctrl-names = "default", "sleep";
70 pinctrl-0 = <&lcd_pins_default &lcd_disen_pins>;
71 pinctrl-1 = <&lcd_pins_sleep>;
73 display-timings {
77 hback-porch = <68>;
78 hfront-porch = <20>;
79 hsync-len = <1>;
80 vback-porch = <18>;
81 vfront-porch = <4>;
82 vsync-len = <1>;
83 clock-frequency = <9000000>;
84 hsync-active = <0>;
85 vsync-active = <0>;
88 panel-info {
89 ac-bias = <255>;
90 ac-bias-intrpt = <0>;
91 dma-burst-sz = <16>;
93 bus-width = <16>;
95 sync-edge = <0>;
96 sync-ctrl = <1>;
97 raster-order = <0>;
98 fifo-th = <0>;
103 pwm7: dmtimer-pwm {
104 compatible = "ti,omap-dmtimer-pwm";
106 pinctrl-names = "default";
107 pinctrl-0 = <&dmtimer7_pins>;
108 ti,clock-source = <0x01>;
111 vmmcsd_fixed: regulator-3v3 {
112 compatible = "regulator-fixed";
113 regulator-name = "vmmcsd_fixed";
114 regulator-min-microvolt = <3300000>;
115 regulator-max-microvolt = <3300000>;
124 pinctrl-names = "default";
125 pinctrl-0 = <&nandflash_pins>;
130 compatible = "ti,omap2-nand";
132 interrupt-parent = <&gpmc>;
135 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 */
136 ti,nand-ecc-opt = "bch16";
137 ti,elm-id = <&elm>;
138 nand-bus-width = <8>;
139 gpmc,device-width = <1>;
140 gpmc,sync-clk-ps = <0>;
141 gpmc,cs-on-ns = <0>;
142 gpmc,cs-rd-off-ns = <44>;
143 gpmc,cs-wr-off-ns = <44>;
144 gpmc,adv-on-ns = <6>;
145 gpmc,adv-rd-off-ns = <34>;
146 gpmc,adv-wr-off-ns = <44>;
147 gpmc,we-on-ns = <0>;
148 gpmc,we-off-ns = <40>;
149 gpmc,oe-on-ns = <0>;
150 gpmc,oe-off-ns = <54>;
151 gpmc,access-ns = <64>;
152 gpmc,rd-cycle-ns = <82>;
153 gpmc,wr-cycle-ns = <82>;
154 gpmc,bus-turnaround-ns = <0>;
155 gpmc,cycle2cycle-delay-ns = <0>;
156 gpmc,clk-activation-ns = <0>;
157 gpmc,wr-access-ns = <40>;
158 gpmc,wr-data-mux-bus-ns = <0>;
163 * All SPL-* partitions are sized to minimal length which can
165 * to size of erase-block.
167 #address-cells = <1>;
168 #size-cells = <1>;
171 label = "SPL";
176 label = "SPL.backup1";
181 label = "SPL.backup2";
186 label = "SPL.backup3";
191 label = "u-boot";
196 label = "u-boot.backup1";
201 label = "u-boot-env";
206 label = "u-boot-env.backup1";
218 pinctrl-names = "default";
219 pinctrl-0 = <&i2c0_pins>;
220 clock-frequency = <400000>;
229 blue-and-red-wiring = "crossed";
234 bus-width = <0x4>;
235 pinctrl-names = "default";
236 pinctrl-0 = <&mmc1_pins>;
237 cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
238 vmmc-supply = <&vmmcsd_fixed>;
244 clock-names = "ext-clk", "int-clk";
245 system-power-controller;
249 ti,pindir-d0-out-d1-in;
250 pinctrl-names = "default";
251 pinctrl-0 = <&spi0_pins>;
258 ti,pmic-shutdown-controller;
259 interrupt-parent = <&intc>;
263 isel = <1>; /* 1 - ISET1, 2 ISET2 */
265 default-brightness = <100>;
270 regulator-name = "vdds_dpr";
271 regulator-always-on;
275 regulator-name = "vdd_mpu";
276 regulator-min-microvolt = <925000>;
277 regulator-max-microvolt = <1351500>;
278 regulator-boot-on;
279 regulator-always-on;
283 regulator-name = "vdd_core";
284 regulator-min-microvolt = <925000>;
285 regulator-max-microvolt = <1150000>;
286 regulator-boot-on;
287 regulator-always-on;
291 regulator-name = "vio,vrtc,vdds";
292 regulator-always-on;
296 regulator-name = "vdd_3v3aux";
297 regulator-always-on;
301 regulator-name = "vdd_1v8";
302 regulator-min-microvolt = <1800000>;
303 regulator-max-microvolt = <1800000>;
304 regulator-always-on;
308 regulator-name = "vdd_3v3a";
309 regulator-always-on;
318 ti,adc-channels = <0 1 2 3 4 5 6>;
323 pinctrl-names = "default";
324 pinctrl-0 = <&uart0_pins>;
337 pinctrl-names = "default";
338 pinctrl-0 = <&clkout2_pin &gpio_pins>;
341 pinctrl-single,pins = <
347 pinctrl-single,pins = <
353 pinctrl-single,pins = <
359 pinctrl-single,pins = <
366 pinctrl-single,pins = <
373 pinctrl-single,pins = <
379 pinctrl-single,pins = <
412 pinctrl-single,pins = <
437 pinctrl-single,pins = <
444 pinctrl-single,pins = <
456 pinctrl-single,pins = <
465 pinctrl-single,pins = <
472 pinctrl-single,pins = <