Lines Matching full:pcm
15 IEC958 (S/PDIF) raw PCM
18 This PCM device (it's the 4th PCM device (index 3!) and first subdevice
22 to 8 raw PCM devices operating at 48kHz, 16-bit little endian. It would
64 This control is used to attenuate samples for left and right PCM FX-bus
65 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples.
66 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
70 This control is used to attenuate samples for left and right PCM FX-bus
71 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples.
77 This control is used to attenuate samples for left and right PCM FX-bus
78 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM samples.
80 the ??rear?? right DAC PCM slot of the AC97 codec.
84 This control is used to attenuate samples for left and right PCM FX-bus
85 accumulators. ALSA uses accumulators 0 and 1 for left and right PCM.
87 the ??rear?? left DAC PCM slot of the AC97 codec.
91 These controls are used to attenuate samples for left and right PCM FX-bus
92 accumulator. ALSA uses accumulators 0 and 1 for left and right PCM.
94 PCM device).
100 The result samples are forwarded to the front DAC PCM slots of the AC97 codec.
105 accumulator. ALSA uses accumulators 4 and 5 for left and right PCM.
107 PCM device).
111 This control is used to attenuate samples for left and right rear PCM FX-bus
112 accumulators. ALSA uses accumulators 2 and 3 for left and right rear PCM samples.
118 These controls are used to attenuate samples for left and right rear PCM FX-bus
119 accumulators. ALSA uses accumulators 2 and 3 for left and right rear PCM samples.
121 PCM device).
125 This control is used to attenuate sample for center PCM FX-bus accumulator.
126 ALSA uses accumulator 6 for center PCM sample. The result sample is forwarded
127 to the ??rear?? right DAC PCM slot of the AC97 codec.
131 This control is used to attenuate sample for center PCM FX-bus accumulator.
132 ALSA uses accumulator 6 for center PCM sample. The result sample is forwarded
133 to the ??rear?? left DAC PCM slot of the AC97 codec.
137 This control is used to attenuate samples for left and right front ADC PCM slots
138 of the AC97 codec. The result samples are forwarded to the front DAC PCM
148 This control is used to attenuate samples for left and right front ADC PCM slots
150 the standard capture PCM device).
160 forwarded to the front DAC PCM slots of the AC97 codec.
166 forwarded to the ADC capture FIFO (thus to the standard capture PCM device).
172 forwarded to the front DAC PCM slots of the AC97 codec.
178 forwarded to the ADC capture FIFO (thus to the standard capture PCM device).
183 digital input. The result samples are forwarded to the front DAC PCM slots
190 (thus to the standard capture PCM device).
195 digital inputs. The result samples are forwarded to the front DAC PCM slots
202 (thus to the standard capture PCM device).
208 DAC PCM slots of the AC97 codec.
214 capture FIFO (thus to the standard capture PCM device).
236 output are taken only from the raw FX8010 PCM, otherwise standard front
237 PCM samples are taken.
245 If this switch is on, then the sample for the center PCM is put to the
251 If this switch is on, then the sample for the center PCM is put to the
256 PCM stream related controls
259 ``name='EMU10K1 PCM Volume',index 0-31``
269 ``name='EMU10K1 PCM Send Routing',index 0-31``
290 ``name='EMU10K1 PCM Send Volume',index 0-31``