Lines Matching full:adapters

28 host adapters which share a common programming interface across a diverse
34 This driver supports all present BusLogic MultiMaster Host Adapters, and should
36 recently, BusLogic introduced the FlashPoint Host Adapters, which are less
38 Despite not having an onboard CPU, the FlashPoint Host Adapters perform very
43 analogous to the firmware on the MultiMaster Host Adapters.  Thanks to their
45 Adapters as well.
48 to achieve the full performance that BusLogic SCSI Host Adapters and modern
55 The latest information on Linux support for BusLogic SCSI Host Adapters, as
73 adapters that have been well tested with Linux even before being brought to
86 "Mylex SCSI host adapters are compatible with all major operating systems
146   BusLogic SCSI Host Adapters directly implement SCSI-2 Tagged Queuing, and so
211   Adapters may share the same interrupt request channel.
214 Supported Host Adapters
217 The following list comprises the supported BusLogic SCSI Host Adapters as of
222 FlashPoint Series PCI Host Adapters:
236 MultiMaster "W" Series Host Adapters:
244 MultiMaster "C" Series Host Adapters:
258 MultiMaster "S" Series Host Adapters:
272 MultiMaster "A" Series Host Adapters:
279 AMI FastDisk Host Adapters that are true BusLogic MultiMaster clones are also
282 BusLogic SCSI Host Adapters are available packaged both as bare boards and as
295   FlashPoint Host Adapters now include RAIDPlus, Mylex's bootable software
307   FlashPoint Host Adapters ship with their configuration set to "Factory
309   to be negotiated.  This results in fewer problems when these host adapters
322 The BT-948/958/958D PCI Ultra SCSI Host Adapters have some features which may
331   that previous BusLogic SCSI Host Adapters respond to.  This driver supports
349   In systems with multiple BusLogic PCI Host Adapters, the order in which the
354   host adapters in the same order.  The motherboard's PCI BIOS provides a
355   standard way of enumerating the PCI host adapters, which is used by the Linux
364   factory default settings of the BT-948/958/958D enumerate the host adapters
371   so as to recognize the host adapters in the same order as they are enumerated
379   negotiated.  This results in fewer problems when these host adapters are
394 for multiple host adapters may be specified either by separating the option
398 adapters whereas the remaining options apply individually only to the
415   Adapters will be detected.
420   Addresses and therefore only PCI MultiMaster and FlashPoint Host Adapters
426   Space and therefore only ISA Multimaster Host Adapters will be detected, as
427   well as PCI Multimaster Host Adapters that have their ISA Compatible I/O
432   The "NoSortPCI" option forces PCI MultiMaster Host Adapters to be
438   The "MultiMasterFirst" option forces MultiMaster Host Adapters to be probed
439   before FlashPoint Host Adapters.  By default, if both FlashPoint and PCI
440   MultiMaster Host Adapters are present, this driver will probe for
441   FlashPoint Host Adapters first unless the BIOS primary disk is controlled
443   Adapters will be probed first.
447   The "FlashPointFirst" option forces FlashPoint Host Adapters to be probed
448   before MultiMaster Host Adapters.
467   capabilities of the detected Target Devices.  For Host Adapters that
523   Adapters.  This may be necessary with some older Target Devices that do not
603 for BusLogic SCSI Host Adapters.  To join the mailing list, send a message to