Lines Matching +full:per +full:- +full:board
49 The Z85230 driver provides the back end interface to your board. To
50 configure a Z8530 interface you need to detect the board and to identify
56 shutdown the board. Firstly zero the active field. This ensures nothing
63 is board dependent, and up to you to initialise.
83 If your board has DMA facilities then initialise the txdma and rxdma
85 channels and do any necessary board level initialisation to configure
87 programming but not board specific magic.
113 netdevice field of each channel. The hdlc-> priv field of the network
114 device points to your private data - you will need to be able to find
151 sure to set registers 1-7, 9-11, 14 and 15 in all configurations. Where
182 driver will configure the board for DMA in both directions. The driver
214 internally maintained per interface statistics block. This provides most
239 per device spin lock would probably materially improve performance.
249 .. kernel-doc:: drivers/net/wan/z85230.c
255 .. kernel-doc:: drivers/net/wan/z85230.c