45 to the same Speed setting via ethtool. Results may vary if you mix speed
282 Ethernet Flow Control (IEEE 802.3x) can be configured with ethtool to enable
292 Use ethtool to change the flow control settings. To enable or disable Rx or
295   ethtool -A eth? rx <on|off> tx <on|off>
303   ethtool -s eth? autoneg <on|off>
325   #ethtool -N eth11 flow-type ip4 src-ip 172.4.1.2 m 255.0.0.0 dst-ip \
334   # ethtool -K ethX ntuple <on|off>
342   # ethtool -N ethX flow-type tcp4 src-ip 192.168.10.1 dst-ip \
347   # ethtool <-u|-n> ethX
352 characteristics. They are enabled through ethtool's ntuple interface. To add a
355   ethtool -U <device> flow-type <type> src-ip <ip> dst-ip <ip> src-port <port> \
367   ethtool -U <device> delete <N>
375   ethtool -U enp130s0 flow-type tcp4 src-ip 192.168.0.1 dst-ip 192.168.0.5 \
381   ethtool -U enp130s0 flow-type ip4 src-ip 192.168.0.1 src-port 5300 action 7
382   ethtool -U enp130s0 flow-type ip4 src-ip 192.168.0.5 src-port 55 action 10
387   ethtool -U enp130s0 flow-type ip4 src-ip 192.168.0.1 src-port 5300 action 7
388   ethtool -U enp130s0 flow-type ip4 dst-ip 192.168.0.5 src-port 55 action 10
474 ethtool  section in Additional Features and Configurations
476 The driver utilizes the ethtool interface for driver configuration and
477 diagnostics, as well as displaying statistical information. The latest ethtool
479 https://www.kernel.org/pub/software/network/ethtool/
515   ethtool --set-priv-flags eth<x> vf-ipsec on