Lines Matching full:auto
70 :Valid Range: 0-2 (0=auto-negotiate, 1=half, 2=full)
75 set to auto-negotiate, the board auto-detects the correct duplex. If the
249 :Default Value: 0 (auto-negotiate at all supported speeds)
253 partner is set to auto-negotiate, the board will auto-detect the correct
346 - The default operation is auto-negotiate. The board advertises all
348 common speed and duplex mode IF the link partner is set to auto-negotiate.
350 - If Speed = 1000, limited auto-negotiation is enabled and only 1000 Mbps
351 is advertised (The 1000BaseT spec requires auto-negotiation.)
353 - If Speed = 10 or 100, then both Speed and Duplex should be set. Auto-
358 auto-negotiation process. It should be used when you wish to control which
359 speed and duplex combinations are advertised during the auto-negotiation