Lines Matching full:based

33 	2.1 CS8900-based Adapter Configuration
34 	2.2 CS8920-based Adapter Configuration
66 The CS8900-based ISA Ethernet Adapters from Cirrus Logic follow
73 CS8920-based adapters are similar to the CS8900-based adapter with additional
111    * Cirrus Logic LAN (CS8900/20-based) Ethernet ISA Adapter
125    * CS8900/20 Setup Utility (DOS-based)
154 Both the CS8900 and CS8920-based adapters can be configured using parameters
155 stored in an on-board EEPROM. You must use the DOS-based CS8900/20 Setup
160 or for interface configuration when an EEPROM is not used. (CS8920-based
163 Since the CS8900/20 Setup Utility is a DOS-based application, you must install
164 and configure the adapter in a DOS-based system using the CS8900/20 Setup
166 installing a CS8900-based adapter and the default configuration is acceptable.)
169 2.1. CS8900-based Adapter Configuration
172 CS8900-based adapters shipped from Cirrus Logic have been configured
190 2.2. CS8920-based Adapter Configuration
193 CS8920-based adapters are shipped from Cirrus Logic configured as Plug
195 support PnP, you must install the CS8920 adapter in a DOS-based PC and
204 	*                    CS8920-BASED ADAPTERS:                    *
206 	* CS8920-BASED ADAPTERS ARE PLUG and PLAY ENABLED BY DEFAULT.  *
388 CS8900/20-based adapter card (it must also be running the CS8900/20 Setup
414 its ability to communicate across the ISA bus based on the system resources
471 This test requires that each of the two PCs have a CS8900/20-based adapter
484     1.  Select a PC with a CS8900/20-based adapter and a known working network
489     2.  Return to the PC with the CS8900/20-based adapter you want to test and
521 of four ways after installing and or configuring the CS8900/20-based adapter:
598     * Plug and Play enabled/disabled (CS8920-based adapters only)