Lines Matching full:eth0
750 A string (eth0, eth2, etc) specifying which slave is the
1088 BONDING_SLAVE0="eth0"
1124 "slave device" is either an interface name, e.g., "eth0", or a device
1204 for eth0 would be named /etc/sysconfig/network-scripts/ifcfg-eth0.
1207 DEVICE=eth0
1318 devices (presumed to be eth0 and eth1), and have it persist across
1325 ip link set eth0 master bond0
1465 To enslave interface eth0 to bond bond0::
1468 # echo +eth0 > /sys/class/net/bond0/bonding/slaves
1470 To free slave eth0 from bond bond0::
1472 # echo -eth0 > /sys/class/net/bond0/bonding/slaves
1476 /sys/class/net/bond0/slave_eth0 pointing to /sys/class/net/eth0, and
1477 /sys/class/net/eth0/master pointing to /sys/class/net/bond0.
1481 # echo -eth0 > /sys/class/net/eth0/master/bonding/slaves
1482 will free eth0 from whatever bond it is enslaved to, regardless of
1547 To make a simple bond of two e100 devices (presumed to be eth0
1557 echo +eth0 > /sys/class/net/bond0/bonding/slaves
1592 active-backup mode, with eth0 and eth1 as slaves::
1596 bond-slaves eth0 eth1
1599 bond-primary eth0 eth1
1612 auto eth0
1613 iface eth0 inet manual
1615 bond-primary eth0 eth1
1620 bond-primary eth0 eth1
1635 bonded interface in which eth0 connects to a private network, while eth1
1637 traffic over eth0 first, using eth1 only as a fall back, while all other traffic
1652 Currently Active Slave: eth0
1658 Slave Interface: eth0
1770 Currently Active Slave: eth0
1780 Slave Interface: eth0
1796 (MASTER) while eth0 and eth1 are slaves (SLAVE). Notice all slaves of
1808 eth0 Link encap:Ethernet HWaddr 00:C0:F0:1F:37:B4
1993 device bond0 has two slaves, eth0 and eth1, and the routing table is
1998 10.0.0.0 0.0.0.0 255.255.0.0 U 40 0 0 eth0
2006 case, another host on network 10 would use eth0 or eth1 before bond0).
2011 will arrive on a different interface (eth0). This reply looks to ARP
2035 alias eth0 tg3
2040 If neither eth0 and eth1 are slaves to bond0, then when the
2044 when the e1000 driver loads, it will receive eth0 and eth1 for its
2101 only one ipAdEntIfIndex for each IP address. For example, if eth0 and
2102 eth1 are slaves of bond0 and the driver for eth0 is loaded before the
2104 with the eth0 interface. This configuration is shown below, the IP
2105 address 192.168.1.1 has an interface index of 2 which indexes to eth0
2111 interfaces.ifTable.ifEntry.ifDescr.2 = eth0
2128 interfaces.ifTable.ifEntry.ifDescr.3 = eth0
2213 eth0 +-------+ eth1
2295 | |eth0 port1| | to other networks
2322 | |eth0 port1| +-------+ Host B |
2651 BladeCenter chassis, the eth0 port of all JS20 blades is hard wired to
2676 modules 1 and 2. In this configuration, the eth0 and eth1 ports of a
2682 switch. By using PMs in I/O module #1 and #2, the eth0 and eth1
2729 ethernet (eth0) only, therefore, any loss of link to eth0 will result
2850 from the bond (``ifenslave -d bond0 eth0``). The bonding driver will