Lines Matching +full:0 +full:- +full:1023

1 .. SPDX-License-Identifier: GPL-2.0
17 -----------
48 -----
52 	RO - shows detected chip type and version
55 	RW - enable / disable chip. Uses counting logic
58 	     0 disables the chip
60 	RO - measured lux value
65 	RO - lux0_input max value.
72 	RW - measurement rate in Hz
75 	RO - supported measurement rates
78 	RW - calibration value.
85 	RO - neutral calibration value
88 	RW - HI level threshold value.
95 	RW - LO level threshold value.
98 	     trigs an interrupt. 0 disables the below interrupt.
101 	RO - measured proximity value
106 	RO - prox0_raw max value (1023)
109 	RW - enable / disable proximity - uses counting logic
111 	     - 1 enables the proximity
112 	     - 0 disables the proximity
115 	RW - trigger / periodic.
118 	     values: 0 or prox0_sensor_range value. 0 means no proximity,
119 	     1023 means proximity. This causes minimal number of interrupts.
125 	RO - accepted values to prox0_reporting_mode (trigger, periodic)
128 	RW - threshold level which trigs proximity events.