Lines Matching +full:5 +full:th
12 Finger Sensing Pad Intellimouse Mode (scrolling wheel, 4th and 5th buttons)
15 A) MSID 4: Scrolling wheel mode plus Forward page(4th button) and Backward
16 page (5th button)
22 5. FSP will respond 0x04.
27 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
44 Bit4 => 1 = 4th mouse button is pressed, Forward one page.
45 0 = 4th mouse button is not pressed.
46 Bit5 => 1 = 5th mouse button is pressed, Backward one page.
47 0 = 5th mouse button is not pressed.
59 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
78 Bit4 => 1 = 4th mouse button is pressed, Forward one page.
79 0 = 4th mouse button is not pressed.
80 Bit5 => 1 = 5th mouse button is pressed, Backward one page.
81 0 = 5th mouse button is not pressed.
103 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
127 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
155 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
180 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
205 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
247 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
274 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
302 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
344 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
366 Bit4 => 4th mouse button(forward one page)
367 Bit5 => 5th mouse button(backward one page)
372 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
396 Bit4 => 4th mouse button(forward one page)
397 Bit5 => 5th mouse button(backward one page)
410 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
450 Bit 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0 7 6 5 4 3 2 1 0
473 Byte 5~8: Don't care (Absolute packet)
537 5. if the register address being to read is not required to be
559 9. the 4th byte of the response read from FSP should be the
582 b. send the inverted register address to FSP and goto step 5;
590 b. send the swapped register address to FSP and goto step 5;
594 a. send the register address to FSP and goto step 5;
596 5. send 0xf3 PS/2 command to FSP;
652 5. send 0x83 PS/2 command to FSP;
671 5. if the page address being written is not required to be
781 0x8234 RW on-pad command control 5
805 0x8240 RW system control 5
846 (Note that if this bit is cleared, bit 3/5 will be ineffective)