Lines Matching full:drives
58 14 & 15). There can be up to two drives per interface, as per the ATA-6 spec.::
72 ones), for the drives/geometries attached to those interfaces, and for the IRQ
82 Drives are normally found by auto-probing and/or examining the CMOS/BIOS data.
118 Courtesy of Scott Snyder and others, the driver supports ATAPI cdrom drives
119 such as the NEC-260 and the new MITSUMI triple/quad speed drives.
120 Such drives will be identified at boot time, just like a hard disk.
203 You also need to use "probe" kernel parameter for ide-4drives driver
204 (support for IDE generic chipset with four drives on one port).
245 National Standard for connecting hard drives to PCs. This is the official
252 ATA Packet Interface, a new protocol for controlling the drives,
256 drives.