Lines Matching full:fan
88 2 to 5 fan rotation speed sensors, 8 to 10 analog voltage sensors, one VID
90 and some automatic fan regulation strategies (plus manual fan control mode).
105 Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
106 triggered if the rotation speed has dropped below a programmable limit. Fan
109 suitable fan divisor itself. Some fans might not be present because they
116 The driver supports automatic fan control mode known as Thermal Cruise.
118 predefined temperature range. If the temperature goes out of range, fan
139 this file stores PWM duty cycle or DC value (fan speed) in range:
144 this file controls mode of fan/temperature control:
148 * 3 "Fan Speed Cruise" mode
149 * 4 "Smart Fan III" mode
150 * 5 "Smart Fan IV" mode
180 there are no changes to fan speed. Once the temperature leaves the interval,
181 fan speed increases (temp is higher) or decreases if lower than desired.
185 minimum fan speed (range 1 - 255), when the temperature
189 corresponding fan off. (when the temperature was below
192 minimum fan speed (range 1 - 255) when spinning up
194 rate of fan speed change (1 - 255)
196 minimum fan speed (range 1 - 255) when spinning down
198 maximum fan speed (range 1 - 255), when the temperature
216 0x49 only on DHG, selects temperature source for AUX fan,
233 0x6b only on DHG, SYS fan critical temperature
235 0x6d only on DHG, AUX fan critical temperature
247 The DHG-P has an additional automatic fan speed control mode named Smart Fan