Lines Matching +full:simple +full:- +full:battery

158     - Christophe Gauthron
159     - Jean Delvare <jdelvare@suse.de>
163 -----------------
167     each read. Default is 0. On some boards the battery voltage is provided
168     by either the battery or the onboard power supply. Only the first reading
169     at power on will be the actual battery voltage (which the chip does
170     automatically). On other boards the battery voltage is always fed to
172     battery life but no information is given in the datasheet.
176     misconfigured by BIOS - PWM values would be inverted. This option tries
181 -------------------
183 All the chips supported by this driver are LPC Super-I/O chips, accessed
184 through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
192 -----------
211 is stored in the Super-I/O configuration space. Due to technical limitations,
222 IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer
224 not compatible with the older chips and revisions. The 16-bit tachometer mode
235 IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode
239 to IT8728F. It only supports 16-bit fan mode. Both chips support up to 6 fans.
241 The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.
243 The IT8732F supports a closed-loop mode for fan control, but this is not
251 16-bit tachometer counters aren't used, fan readings can be divided by
264 2.8 volts with a resolution of 0.0109 volt.  The battery voltage in8 does not
273 The driver handles this transparently so user-space doesn't have to care.
284 once-only alarms.
286 Out-of-limit readings can also result in beeping, if the chip is properly
301 -----------------
312 read-only.
316 -------------------------------------------
330 temperature, based on this simple rule: if the temperature value is
342 -----------------------------
344 The driver supports temp[1-3]_offset sysfs attributes to adjust the reported
345 temperature for thermal diodes or diode-connected thermal transistors.