Lines Matching +full:super +full:- +full:speed
10 Addresses scanned: from Super I/O config space (8 I/O ports)
18 Addresses scanned: from Super I/O config space (8 I/O ports)
24 Addresses scanned: from Super I/O config space (8 I/O ports)
32 Addresses scanned: from Super I/O config space (8 I/O ports)
40 Addresses scanned: from Super I/O config space (8 I/O ports)
48 Addresses scanned: from Super I/O config space (8 I/O ports)
56 Addresses scanned: from Super I/O config space (8 I/O ports)
64 Addresses scanned: from Super I/O config space (8 I/O ports)
72 Addresses scanned: from Super I/O config space (8 I/O ports)
80 Addresses scanned: from Super I/O config space (8 I/O ports)
88 Addresses scanned: from Super I/O config space (8 I/O ports)
96 Addresses scanned: from Super I/O config space (8 I/O ports)
104 Addresses scanned: from Super I/O config space (8 I/O ports)
112 Addresses scanned: from Super I/O config space (8 I/O ports)
120 Addresses scanned: from Super I/O config space (8 I/O ports)
128 Addresses scanned: from Super I/O config space (8 I/O ports)
136 Addresses scanned: from Super I/O config space (8 I/O ports)
144 Addresses scanned: from Super I/O config space (8 I/O ports)
152 Addresses scanned: from Super I/O config space (8 I/O ports)
158 - Christophe Gauthron
159 - Jean Delvare <jdelvare@suse.de>
163 -----------------
176 misconfigured by BIOS - PWM values would be inverted. This option tries
181 -------------------
183 All the chips supported by this driver are LPC Super-I/O chips, accessed
184 through the LPC bus (ISA-like I/O ports). The IT8712F additionally has an
192 -----------
199 These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
202 rotation speed sensors, 8 voltage sensors, associated alarms, and chassis
211 is stored in the Super-I/O configuration space. Due to technical limitations,
222 IT8783E/F, and late IT8712F and IT8705F also have optional 16-bit tachometer
224 not compatible with the older chips and revisions. The 16-bit tachometer mode
235 IT8728F. It only supports 3 fans, 16-bit fan mode, and the full speed mode
239 to IT8728F. It only supports 16-bit fan mode. Both chips support up to 6 fans.
241 The IT8790E supports up to 3 fans. 16-bit fan mode is always enabled.
243 The IT8732F supports a closed-loop mode for fan control, but this is not
250 triggered if the rotation speed has dropped below a programmable limit. When
251 16-bit tachometer counters aren't used, fan readings can be divided by
273 The driver handles this transparently so user-space doesn't have to care.
284 once-only alarms.
286 Out-of-limit readings can also result in beeping, if the chip is properly
300 Fan speed control
301 -----------------
303 The fan speed control features are limited to manual PWM mode. Automatic
308 If you are only able to control the fan speed with very small PWM values,
312 read-only.
315 Automatic fan speed control (old interface)
316 -------------------------------------------
318 The driver supports the old interface to automatic fan speed control
324 at full speed) while the PWM output of the other 3 trip points can be
336 Trip points must be set properly before switching to automatic fan speed
342 -----------------------------
344 The driver supports temp[1-3]_offset sysfs attributes to adjust the reported
345 temperature for thermal diodes or diode-connected thermal transistors.