Lines Matching full:volt
191 - Sensor 3 CPU core volt
192 - Sensor 4 DDR volt
193 - Sensor 10 DDR Vtt volt
198 volt and temp sensors, this is motherboard specific. The uGuru however does
202 Volt sensors use a linear scale, a reading 0 corresponds with 0 volt and a
205 in use result in ranges of: 0-4361mV, 0-6248mV or 0-14510mV. 3.3 volt sources
206 use the 0-4361mV range, 5 volt the 0-6248mV and 12 volt the 0-14510mV .
227 Give an alarm if measured volt is over the max threshold (RW) [2]_
230 Give an alarm if measured volt is under the min threshold (RW) [2]_
239 1 if alarm cause measured volt is over the max threshold (R)
242 1 if alarm cause measured volt is under the min threshold (R)
245 - Volt sensor: Shutdown if alarm persist for more than 4 seconds (RW)
250 .. [2] This bit is only honored/used by the uGuru if a volt sensor is connected
257 - Volt sensor: min threshold (scale as bank 0x21)
261 - Volt sensor: max threshold (scale as bank 0x21)