Lines Matching +full:ac +full:- +full:detect +full:- +full:gpios

6 the right in-kernel and userspace APIs/ABIs for the job, and that these
10 - leds-gpio: drivers/leds/leds-gpio.c will handle LEDs connected to  GPIO
13 - ledtrig-gpio: drivers/leds/trigger/ledtrig-gpio.c will provide a LED trigger,
15   (and that LED may in turn use the leds-gpio as per above).
17 - gpio-keys: drivers/input/keyboard/gpio_keys.c is used when your GPIO line
20 - gpio-keys-polled: drivers/input/keyboard/gpio_keys_polled.c is used when your
24 - gpio_mouse: drivers/input/mouse/gpio_mouse.c is used to provide a mouse with
25   up to three buttons by simply using GPIOs and no mouse port. You can cut the
29 - gpio-beeper: drivers/input/misc/gpio-beeper.c is used to provide a beep from
32 - extcon-gpio: drivers/extcon/extcon-gpio.c is used when you need to read an
36 - restart-gpio: drivers/power/reset/gpio-restart.c is used to restart/reboot
40 - poweroff-gpio: drivers/power/reset/gpio-poweroff.c is used to power the
45 - gpio-gate-clock: drivers/clk/clk-gpio.c is used to control a gated clock
48 - i2c-gpio: drivers/i2c/busses/i2c-gpio.c is used to drive an I2C bus
53 - spi_gpio: drivers/spi/spi-gpio.c is used to drive an SPI bus (variable number
60 - w1-gpio: drivers/w1/masters/w1-gpio.c is used to drive a one-wire bus using
64 - gpio-fan: drivers/hwmon/gpio-fan.c is used to control a fan for cooling the
66   presenting all the right in-kernel and sysfs interfaces to make your system
69 - gpio-regulator: drivers/regulator/gpio-regulator.c is used to control a
73 - gpio-wdt: drivers/watchdog/gpio_wdt.c is used to provide a watchdog timer
75   it from 1-to-0-to-1. If that hardware does not receive its "ping"
78 - gpio-nand: drivers/mtd/nand/raw/gpio.c is used to connect a NAND flash chip
83 - ps2-gpio: drivers/input/serio/ps2-gpio.c is used to drive a PS/2 (IBM) serio
88 - cec-gpio: drivers/media/platform/cec-gpio/ is used to interact with a CEC
92 - gpio-charger: drivers/power/supply/gpio-charger.c is used if you need to do
94   AC charger or more complex tasks such as indicating charging status using
100 read card detect and write protect GPIO lines, and in the TTY serial subsystem
102 MTD NOR flash has add-ons for extra GPIO lines too, though the address bus is
105 Use those instead of talking directly to the GPIOs from userspace; they
108 speed up your embedded hacking in particular by providing ready-made components.