Lines Matching refs:Count

33   Association of a Signal, and evaluation trigger, with a Count.
35 * Count:
58 A Synapse represents the association of a Signal with a Count. Signal
59 data affects respective Count data, and the Synapse represents this
63 triggers the respective Count's count function evaluation to update the
88 A Synapse associates one Signal with one Count.
92 A Count represents the accumulation of the effects of connected
96 A Count has a count function mode which represents the update behavior
138 A Count has a set of one or more associated Synapses.
143 The most basic counter device may be expressed as a single Count
148                 Count                Synapse        Signal
151         | Data: Count         |    Rising Edge     ________
157 voltage, while the Count is a persistent count value which is repeatedly
158 incremented. The Signal is associated with the respective Count via a
162 behavior is aptly represented by respective Count, Signal, and Synapse
167 many Signals may be associated with even a single Count. For example, a
171                    Count                 Synapse     Signal
184 associated with a single Count: a rising or falling edge on either A or
188 encoder counter device; the Count, Signals, and Synapses simply
191 Signals associated with the same Count can have differing Synapse action
197                    Count                   Synapse      Signal
212 both Signals are associated with the same Count via two respective
218 Keep in mind that the Signal, Synapse, and Count are abstract
288 exposure and configuration of a specific Count or Signal respectively.
300 * Count extensions are attributes that expose information/control
301   specific to a Count. These type of attributes will exist under a
302   Count's directory in sysfs.
304   For example, if you want to pause/unpause a Count from updating, you
305   can have a Count extension called "enable" that toggles such:
309   non-specific to a particular Count or Signal. This is where you would
343 Similarly, each Count has a directory created to house its relevant
344 sysfs attributes, where Y is the unique ID of the respective Count:
357 respective Count attributes; similarly, the same is true for the