Lines Matching +full:hardware +full:- +full:triggered

3 ADI is the abbreviation of Anolog-Digital interface, which is used to access
5 framework for its hardware implementation is alike to SPI bus and its timing
9 48 hardware channels to access analog chip. For 2 software read/write channels,
10 users should set ADI registers to access analog chip. For hardware channels,
11 we can configure them to allow other hardware components to use it independently,
12 which means we can just link one analog chip address to one hardware channel,
13 then users can access the mapped analog chip address by this hardware channel
14 triggered by hardware components instead of ADI software channels.
16 Thus we introduce one property named "sprd,hw-channels" to configure hardware
17 channels, the first value specifies the hardware channel id which is used to
18 transfer data triggered by hardware automatically, and the second value specifies
19 the analog chip address where user want to access by hardware components.
21 Since we have multi-subsystems will use unique ADI to access analog chip, when
23 one hardware spinlock protection to prevent other systems from reading/writing
26 Then we need one hardware spinlock to synchronize between the multiple subsystems.
29 subsystem accessing, that means no need to add hardware spinlock to synchronize,
30 thus change the hardware spinlock support to be optional to keep backward
34 - compatible: Should be "sprd,sc9860-adi".
35 - reg: Offset and length of ADI-SPI controller register space.
36 - #address-cells: Number of cells required to define a chip select address
37 	on the ADI-SPI bus. Should be set to 1.
38 - #size-cells: Size of cells required to define a chip select address size
39 	on the ADI-SPI bus. Should be set to 0.
42 - hwlocks: Reference to a phandle of a hwlock provider node.
43 - hwlock-names: Reference to hwlock name strings defined in the same order
45 - sprd,hw-channels: This is an array of channel values up to 49 channels.
46 	The first value specifies the hardware channel id which is used to
47 	transfer data triggered by hardware automatically, and the second
49 	by hardware components.
52 properties described in Documentation/devicetree/bindings/spi/spi-bus.txt.
56 		compatible = "sprd,sc9860-adi";
59 		hwlock-names = "adi";
60 		#address-cells = <1>;
61 		#size-cells = <0>;
62 		sprd,hw-channels = <30 0x8c20>;