Lines Matching refs:SSI
17 SSI : Serial Sound Interface
25 Multi channel is supported by Multi-SSI, or TDM-SSI.
27 Multi-SSI : 6ch case, you can use stereo x 3 SSI
28 TDM-SSI : 6ch case, you can use TDM
185 But you can't use it if SSI was PIO mode.
186 In DMA mode, you can select not to use SSIU by using "no-busif" via SSI.
192 and these sounds will be merged SSIU/SSI.
211 * SSI (Serial Sound Interface)
217 Note: The system will drop non-SSI modules in PIO mode
235 Each SSI can share WS pin. It is based on platform.
242 ** Multi-SSI
244 You can use Multi-SSI.
249 ** TDM-SSI
251 You can use TDM with SSI.
288 SRU/ADG/SSI if generation1
289 SRU/ADG/SSIU/SSI/AUDIO-DMAC-periperi if generation2/generation3
295 - rcar_sound,ssi : Should contain SSI feature.
296 The number of SSI subnode should be same as HW.
318 - clocks : References to SSI/SRC/MIX/CTU/DVC/AUDIO_CLK clocks.
329 - resets : References to SSI resets.
333 SSI subnode properties:
334 - interrupts : Should contain SSI interrupt for PIO transfer
337 - no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case
339 - dma-names : SSI case "rx" (=playback), "tx" (=capture)
370 <0 0xec541000 0 0x1280>, /* SSI */