Lines Matching full:signal

1 = Reset Signal Device Tree Bindings =
8 Hardware blocks typically receive a reset signal. This signal is generated by
14 A reset signal is represented by the phandle of the provider, plus a reset
15 specifier - a list of DT cells that represents the reset signal within the
20 A word on where to place reset signal consumers in device tree: It is possible
21 in hardware for a reset signal to affect multiple logically separate HW blocks
22 at once. In this case, it would be unwise to represent this reset signal in
26 children of the bus are affected by the reset signal, or an individual HW
29 rather than to slavishly enumerate the reset signal that affects each HW
49 		for each reset signal that affects the device, or that the
55 reset-names:	List of reset signal name strings sorted in the same order as
57 		match reset signal names with reset specifiers.
66 This represents a device with a single reset signal named "reset".
73 This represents a bus that controls the reset signal of each of four sub-