Lines Matching +full:suspend +full:- +full:mode
1 Device-Tree bindings for regulators of Active-semi ACT8945A Multi-Function Device
4 - compatible: "active-semi,act8945a", please refer to ../mfd/act8945a.txt.
7 - active-semi,vsel-high: Indicates if the VSEL pin is set to logic-high.
8 If this property is missing, assume the VSEL pin is set to logic-low.
11 - vp1-supply: The input supply for REG_DCDC1
12 - vp2-supply: The input supply for REG_DCDC2
13 - vp3-supply: The input supply for REG_DCDC3
14 - inl45-supply: The input supply for REG_LDO1 and REG_LDO2
15 - inl67-supply: The input supply for REG_LDO3 and REG_LDO4
18 regulator-initial-mode, regulator-allowed-modes and regulator-mode could be
19 specified using mode values from dt-bindings/regulator/active-semi,8945a-regulator.h
27 #include <dt-bindings/regulator/active-semi,8945a-regulator.h>
30 compatible = "active-semi,act8945a";
33 active-semi,vsel-high;
37 regulator-name = "VDD_1V35";
38 regulator-min-microvolt = <1350000>;
39 regulator-max-microvolt = <1350000>;
40 regulator-always-on;
42 regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
44 regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
46 regulator-state-mem {
47 regulator-on-in-suspend;
48 regulator-suspend-min-microvolt=<1400000>;
49 regulator-suspend-max-microvolt=<1400000>;
50 regulator-changeable-in-suspend;
51 regulator-mode=<ACT8945A_REGULATOR_MODE_LOWPOWER>;
56 regulator-name = "VDD_1V2";
57 regulator-min-microvolt = <1100000>;
58 regulator-max-microvolt = <1300000>;
59 regulator-always-on;
61 regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_FIXED>,
63 regulator-initial-mode = <ACT8945A_REGULATOR_MODE_FIXED>;
65 regulator-state-mem {
66 regulator-off-in-suspend;
71 regulator-name = "VDD_3V3";
72 regulator-min-microvolt = <3300000>;
73 regulator-max-microvolt = <3300000>;
74 regulator-always-on;
78 regulator-name = "VDD_FUSE";
79 regulator-min-microvolt = <2500000>;
80 regulator-max-microvolt = <2500000>;
81 regulator-always-on;
83 regulator-allowed-modes = <ACT8945A_REGULATOR_MODE_NORMAL>,
85 regulator-initial-mode = <ACT8945A_REGULATOR_MODE_NORMAL>;
87 regulator-state-mem {
88 regulator-off-in-suspend;
93 regulator-name = "VDD_3V3_LP";
94 regulator-min-microvolt = <3300000>;
95 regulator-max-microvolt = <3300000>;
96 regulator-always-on;
100 regulator-name = "VDD_LED";
101 regulator-min-microvolt = <3300000>;
102 regulator-max-microvolt = <3300000>;
103 regulator-always-on;
107 regulator-name = "VDD_SDHC_1V8";
108 regulator-min-microvolt = <1800000>;
109 regulator-max-microvolt = <1800000>;
110 regulator-always-on;