Lines Matching +full:usb +full:- +full:sdp
1 TI BQ24190 Li-Ion Battery Charger
4 - compatible: contains one of the following:
9 - reg: integer, I2C address of the charger.
10 - interrupts[-extended]: configuration for charger INT pin.
13 - monitored-battery: phandle of battery characteristics devicetree node
15 + precharge-current-microamp: maximum charge current during precharge
17 + charge-term-current-microamp: a charge cycle terminates when the
21 - ti,system-minimum-microvolt: when power is connected and the battery is below
25 - usb-otg-vbus:
28 either USB host mode or for charging on the OTG port.
31 - Some circuit boards wire the chip's "OTG" pin high (enabling 500mA default
32 charge current on USB SDP ports, among other features). To simulate this on
33 boards that wire the pin to a GPIO, set a gpio-hog.
38 compatible = "simple-battery";
39 precharge-current-microamp = <256000>;
40 charge-term-current-microamp = <128000>;
47 interrupts-extended = <&gpiochip 10 IRQ_TYPE_EDGE_FALLING>;
48 monitored-battery = <&bat>;
49 ti,system-minimum-microvolt = <3200000>;
51 usb_otg_vbus: usb-otg-vbus { };
56 gpio-hog;
58 output-high;
59 line-name = "otg-gpio";