Lines Matching +full:gpio +full:- +full:charger

1 Device-Tree bindings for charger of Active-semi ACT8945A Multi-Function Device
4  - compatible: "active-semi,act8945a-charger".
5  - active-semi,chglev-gpios: charge current level phandle with args
6    as described in ../gpio/gpio.txt.
7  - active-semi,lbo-gpios: specify the low battery voltage detect phandle
8    with args as as described in ../gpio/gpio.txt.
9  - interrupts: <a b> where a is the interrupt number and b is a
14  - active-semi,input-voltage-threshold-microvolt: unit: mV;
15    Specifies the charger's input over-voltage threshold value;
17  - active-semi,precondition-timeout: unit: minutes;
18    Specifies the charger's PRECONDITION safety timer setting value;
21  - active-semi,total-timeout: unit: hours;
22    Specifies the charger's total safety timer setting value;
28 		compatible = "active-semi,act8945a";
31 		charger {
32 			compatible = "active-semi,act8945a-charger";
33 			pinctrl-names = "default";
34 			pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
35 			interrupt-parent = <&pioA>;
38 			active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
39 			active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
40 			active-semi,input-voltage-threshold-microvolt = <6600>;
41 			active-semi,precondition-timeout = <40>;
42 			active-semi,total-timeout = <3>;