Lines Matching full:definition
9 Definition: must be "qcom,sm8150-pinctrl"
14 Definition: the base address and size of the north, south, west
26 Definition: should specify the TLMM summary IRQ.
31 Definition: identifies this node as an interrupt controller
36 Definition: must be 2. Specifying the pin number and flags, as defined
42 Definition: identifies this node as a gpio controller
47 Definition: must be 2. Specifying the pin number and flags, as defined
53 Definition: see ../gpio/gpio.txt
58 Definition: see ../gpio/gpio.txt
92 Definition: List of gpio pins affected by the properties specified in
109 Definition: Specify the alternative function to be configured for the
142 Definition: The specified pins should be configued as no pull.
147 Definition: The specified pins should be configued as pull down.
152 Definition: The specified pins should be configued as pull up.
157 Definition: The specified pins are configured in output mode, driven
164 Definition: The specified pins are configured in output mode, driven
171 Definition: Selects the drive strength for the specified pins, in mA.