Lines Matching full:definition

9 	Definition: must be "qcom,sdm845-pinctrl"
14 	Definition: the base address and size of the TLMM register space.
19 	Definition: should specify the TLMM summary IRQ.
24 	Definition: identifies this node as an interrupt controller
29 	Definition: must be 2. Specifying the pin number and flags, as defined
35 	Definition: identifies this node as a gpio controller
40 	Definition: must be 2. Specifying the pin number and flags, as defined
75 	Definition: List of gpio pins affected by the properties specified in
88 	Definition: Specify the alternative function to be configured for the
121 	Definition: The specified pins should be configured as no pull.
126 	Definition: The specified pins should be configured as pull down.
131 	Definition: The specified pins should be configured as pull up.
136 	Definition: The specified pins are configured in output mode, driven
143 	Definition: The specified pins are configured in output mode, driven
150 	Definition: Selects the drive strength for the specified pins, in mA.