Lines Matching full:definition
9 Definition: must be "qcom,sdm660-pinctrl" or
15 Definition: the base address and size of the north, center and south
21 Definition: names for the cells of reg, must contain "north", "center"
27 Definition: should specify the TLMM summary IRQ.
32 Definition: identifies this node as an interrupt controller
37 Definition: must be 2. Specifying the pin number and flags, as defined
43 Definition: identifies this node as a gpio controller
48 Definition: Specifies the mapping between gpio controller and
54 Definition: must be 2. Specifying the pin number and flags, as defined
89 Definition: List of gpio pins affected by the properties specified in
99 Definition: Specify the alternative function to be configured for the
145 Definition: The specified pins should be configured as no pull.
150 Definition: The specified pins should be configured as pull down.
155 Definition: The specified pins should be configured as pull up.
160 Definition: The specified pins are configured in output mode, driven
167 Definition: The specified pins are configured in output mode, driven
174 Definition: Selects the drive strength for the specified pins, in mA.