Lines Matching full:definition
9 Definition: must be "qcom,sc7180-pinctrl"
14 Definition: the base address and size of the north, south and west
20 Definition: names for the cells of reg, must contain "north", "south"
26 Definition: should specify the TLMM summary IRQ.
31 Definition: identifies this node as an interrupt controller
36 Definition: must be 2. Specifying the pin number and flags, as defined
42 Definition: identifies this node as a gpio controller
47 Definition: must be 2. Specifying the pin number and flags, as defined
53 Definition: see ../gpio/gpio.txt
58 Definition: see ../gpio/gpio.txt
92 Definition: List of gpio pins affected by the properties specified in
109 Definition: Specify the alternative function to be configured for the
140 Definition: The specified pins should be configured as no pull.
145 Definition: The specified pins should be configured as pull down.
150 Definition: The specified pins should be configured as pull up.
155 Definition: The specified pins are configured in output mode, driven
162 Definition: The specified pins are configured in output mode, driven
169 Definition: Selects the drive strength for the specified pins, in mA.