Lines Matching full:definition
9 Definition: must be "qcom,qcs404-pinctrl"
14 Definition: the base address and size of the north, south and east TLMM
26 Definition: should specify the TLMM summary IRQ.
31 Definition: identifies this node as an interrupt controller
36 Definition: must be 2. Specifying the pin number and flags, as defined
42 Definition: identifies this node as a gpio controller
47 Definition: must be 2. Specifying the pin number and flags, as defined
52 Definition: see ../gpio/gpio.txt
86 Definition: List of gpio pins affected by the properties specified in
103 Definition: Specify the alternative function to be configured for the
153 Definition: The specified pins should be configured as no pull.
158 Definition: The specified pins should be configured as pull down.
163 Definition: The specified pins should be configured as pull up.
168 Definition: The specified pins are configured in output mode, driven
175 Definition: The specified pins are configured in output mode, driven
182 Definition: Selects the drive strength for the specified pins, in mA.