Lines Matching full:definition
9 Definition: must be "qcom,msm8976-pinctrl"
14 Definition: the base address and size of the TLMM register space.
19 Definition: should specify the TLMM summary IRQ.
24 Definition: identifies this node as an interrupt controller
29 Definition: must be 2. Specifying the pin number and flags, as defined
35 Definition: identifies this node as a gpio controller
40 Definition: must be 2. Specifying the pin number and flags, as defined
45 Definition: see ../gpio/gpio.txt
49 Definition: see ../gpio/gpio.txt
83 Definition: List of gpio pins affected by the properties specified in
98 Definition: Specify the alternative function to be configured for the
127 Definition: The specified pins should be configured as no pull.
132 Definition: The specified pins should be configured as pull down.
137 Definition: The specified pins should be configured as pull up.
142 Definition: The specified pins are configured in output mode, driven
149 Definition: The specified pins are configured in output mode, driven
156 Definition: Selects the drive strength for the specified pins, in mA.