Lines Matching full:definition
9 Definition: must be "qcom,apq8084-pinctrl"
14 Definition: the base address and size of the TLMM register space.
19 Definition: should specify the TLMM summary IRQ.
24 Definition: identifies this node as an interrupt controller
29 Definition: must be 2. Specifying the pin number and flags, as defined
35 Definition: identifies this node as a gpio controller
40 Definition: must be 2. Specifying the pin number and flags, as defined
45 Definition: see ../gpio/gpio.txt
49 Definition: see ../gpio/gpio.txt
83 Definition: List of gpio pins affected by the properties specified in
96 Definition: Specify the alternative function to be configured for the
125 Definition: The specified pins should be configured as no pull.
130 Definition: The specified pins should be configured as pull down.
135 Definition: The specified pins should be configured as pull up.
140 Definition: The specified pins are configured in output mode, driven
147 Definition: The specified pins are configured in output mode, driven
154 Definition: Selects the drive strength for the specified pins, in mA.