Lines Matching +full:usb2 +full:- +full:phy

1 ST STiH407 USB PHY controller
3 This file documents the dt bindings for the usb picoPHY driver which is the PHY for both USB2 and U…
4 host controllers (when controlling usb2/1.1 devices) available on STiH407 SoC family from STMicroel…
7 - compatible		: should be "st,stih407-usb2-phy"
8 - st,syscfg		: phandle of sysconfig bank plus integer array containing phyparam and phyctrl registe…
9 - resets		: list of phandle and reset specifier pairs. There should be two entries, one
10 			  for the whole phy and one for the port
11 - reset-names		: list of reset signal names. Should be "global" and "port"
12 See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
18 	compatible	= "st,stih407-usb2-phy";
19 	#phy-cells	= <0>;
23 	reset-names	= "global", "port";