Lines Matching +full:phy +full:- +full:names
1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/phy/allwinner,sun8i-h3-usb-phy.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
7 title: Allwinner H3 USB PHY Device Tree Bindings
10 - Chen-Yu Tsai <wens@csie.org>
11 - Maxime Ripard <mripard@kernel.org>
14 "#phy-cells":
18 const: allwinner,sun8i-h3-usb-phy
22 - description: PHY Control registers
23 - description: PHY PMU0 registers
24 - description: PHY PMU1 registers
25 - description: PHY PMU2 registers
26 - description: PHY PMU3 registers
28 reg-names:
30 - const: phy_ctrl
31 - const: pmu0
32 - const: pmu1
33 - const: pmu2
34 - const: pmu3
38 - description: USB OTG PHY bus clock
39 - description: USB Host 0 PHY bus clock
40 - description: USB Host 1 PHY bus clock
41 - description: USB Host 2 PHY bus clock
43 clock-names:
45 - const: usb0_phy
46 - const: usb1_phy
47 - const: usb2_phy
48 - const: usb3_phy
52 - description: USB OTG reset
53 - description: USB Host 1 Controller reset
54 - description: USB Host 2 Controller reset
55 - description: USB Host 3 Controller reset
57 reset-names:
59 - const: usb0_reset
60 - const: usb1_reset
61 - const: usb2_reset
62 - const: usb3_reset
64 usb0_id_det-gpios:
67 usb0_vbus_det-gpios:
70 usb0_vbus_power-supply:
73 usb0_vbus-supply:
76 usb1_vbus-supply:
79 usb2_vbus-supply:
82 usb3_vbus-supply:
86 - "#phy-cells"
87 - compatible
88 - clocks
89 - clock-names
90 - reg
91 - reg-names
92 - resets
93 - reset-names
98 - |
99 #include <dt-bindings/gpio/gpio.h>
100 #include <dt-bindings/clock/sun8i-h3-ccu.h>
101 #include <dt-bindings/reset/sun8i-h3-ccu.h>
103 phy@1c19400 {
104 #phy-cells = <1>;
105 compatible = "allwinner,sun8i-h3-usb-phy";
111 reg-names = "phy_ctrl",
120 clock-names = "usb0_phy",
128 reset-names = "usb0_reset",
132 usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
133 usb0_vbus-supply = <®_usb0_vbus>;
134 usb1_vbus-supply = <®_usb1_vbus>;
135 usb2_vbus-supply = <®_usb2_vbus>;
136 usb3_vbus-supply = <®_usb3_vbus>;