Lines Matching +full:max +full:- +full:speed
2 ---------------------
11 - compatible: should contain one of the following:
12 * "qcom,qca6174-bt"
13 * "qcom,qca9377-bt"
14 * "qcom,wcn3990-bt"
15 * "qcom,wcn3991-bt"
16 * "qcom,wcn3998-bt"
17 * "qcom,qca6390-bt"
19 Optional properties for compatible string qcom,qca6174-bt:
21 - enable-gpios: gpio specifier used to enable chip
22 - clocks: clock provided to the controller (SUSCLK_32KHZ)
23 - firmware-name: specify the name of nvm firmware to load
25 Optional properties for compatible string qcom,qca9377-bt:
27 - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
29 Required properties for compatible string qcom,wcn399x-bt:
31 - vddio-supply: VDD_IO supply regulator handle.
32 - vddxo-supply: VDD_XO supply regulator handle.
33 - vddrf-supply: VDD_RF supply regulator handle.
34 - vddch0-supply: VDD_CH0 supply regulator handle.
36 Optional properties for compatible string qcom,wcn399x-bt:
38 - max-speed: see Documentation/devicetree/bindings/serial/serial.yaml
39 - firmware-name: specify the name of nvm firmware to load
40 - clocks: clock provided to the controller
45 label = "BT-UART";
49 compatible = "qcom,qca6174-bt";
51 enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
53 firmware-name = "nvm_00440302.bin";
59 compatible = "qcom,wcn3990-bt";
61 vddio-supply = <&vreg_s4a_1p8>;
62 vddxo-supply = <&vreg_l7a_1p8>;
63 vddrf-supply = <&vreg_l17a_1p3>;
64 vddch0-supply = <&vreg_l25a_3p3>;
65 max-speed = <3200000>;
66 firmware-name = "crnv21.bin";