Lines Matching +full:gcc +full:- +full:qcs404
10 - compatible: Should be qcom,qcs404-ethqos"
12 - reg: Address and length of the register set for the device
14 - reg-names: Should contain register names "stmmaceth", "rgmii"
16 - clocks: Should contain phandle to clocks
18 - clock-names: Should contain clock names "stmmaceth", "pclk",
21 - interrupts: Should contain phandle to interrupts
23 - interrupt-names: Should contain interrupt names "macirq", "eth_lpi"
31 compatible = "qcom,qcs404-ethqos";
34 reg-names = "stmmaceth", "rgmii";
35 clock-names = "stmmaceth", "pclk", "ptp_ref", "rgmii";
36 clocks = <&gcc GCC_ETH_AXI_CLK>,
37 <&gcc GCC_ETH_SLAVE_AHB_CLK>,
38 <&gcc GCC_ETH_PTP_CLK>,
39 <&gcc GCC_ETH_RGMII_CLK>;
42 interrupt-names = "macirq", "eth_lpi";
43 snps,reset-gpio = <&tlmm 60 GPIO_ACTIVE_LOW>;
44 snps,reset-active-low;
51 phy-handle = <&phy1>;
52 phy-mode = "rgmii";
55 #address-cells = <0x1>;
56 #size-cells = <0x0>;
57 compatible = "snps,dwmac-mdio";
59 device_type = "ethernet-phy";