Lines Matching +full:max +full:- +full:link +full:- +full:speed
1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/net/ethernet-controller.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - David S. Miller <davem@davemloft.net>
16 local-mac-address:
19 $ref: /schemas/types.yaml#definitions/uint8-array
21 - minItems: 6
24 mac-address:
29 local-mac-address property.
30 $ref: /schemas/types.yaml#definitions/uint8-array
32 - minItems: 6
35 max-frame-size:
42 max-speed:
45 Specifies maximum speed in Mbit/s supported by the device.
47 nvmem-cells:
52 nvmem-cells-names:
53 const: mac-address
55 phy-connection-type:
63 - internal
64 - mii
65 - gmii
66 - sgmii
67 - qsgmii
68 - tbi
69 - rev-mii
70 - rmii
73 - rgmii
77 - rgmii-id
81 - rgmii-rxid
85 - rgmii-txid
86 - rtbi
87 - smii
88 - xgmii
89 - trgmii
90 - 1000base-x
91 - 2500base-x
92 - rxaui
93 - xaui
95 # 10GBASE-KR, XFI, SFI
96 - 10gbase-kr
97 - usxgmii
99 phy-mode:
100 $ref: "#/properties/phy-connection-type"
102 phy-handle:
108 $ref: "#/properties/phy-handle"
111 phy-device:
112 $ref: "#/properties/phy-handle"
115 rx-fifo-depth:
123 rx-internal-delay-ps:
135 tx-fifo-depth:
141 tx-internal-delay-ps:
150 Specifies the PHY management type. If auto is set and fixed-link
155 - auto
156 - in-band-status
158 fixed-link:
160 - if:
168 - minimum: 0
172 specified fixed-links
174 - enum: [0, 1]
179 - enum: [10, 100, 1000]
181 Link speed in Mbits/sec.
183 - enum: [0, 1]
187 - enum: [0, 1]
193 - if:
197 speed:
199 Link speed.
203 full-duplex:
206 Indicates that full-duplex is used. When absent, half
209 asym-pause:
214 link-gpios:
217 GPIO to determine if the link is up
220 - speed