Lines Matching +full:sdhci +full:- +full:8

1 Marvell Xenon SDHCI Controller device tree bindings
11 - compatible: should be one of the following
12   - "marvell,armada-3700-sdhci": For controllers on Armada-3700 SoC.
13   Must provide a second register area and marvell,pad-type.
14   - "marvell,armada-ap806-sdhci": For controllers on Armada AP806.
15   - "marvell,armada-cp110-sdhci": For controllers on Armada CP110.
17 - clocks:
22 - clock-names:
27 - reg:
28   * For "marvell,armada-3700-sdhci", two register areas.
31     Please follow the examples with compatible "marvell,armada-3700-sdhci"
33     Please also check property marvell,pad-type in below.
38 - marvell,xenon-sdhc-id:
44 - marvell,xenon-phy-type:
47   marvell,xenon-phy-type = "emmc 5.1 phy"
50   marvell,xenon-phy-type = "emmc 5.0 phy"
58 - marvell,xenon-phy-znr:
64 - marvell,xenon-phy-zpr:
70 - marvell,xenon-phy-nr-success-tun:
76 - marvell,xenon-phy-tun-step-divider:
80 - marvell,xenon-phy-slow-mode:
87 - marvell,xenon-tun-count:
88   Xenon SDHC SoC usually doesn't provide re-tuning counter in
89   Capabilities Register 3 Bit[11:8].
90   This property provides the re-tuning counter.
91   If this property is not set, default re-tuning counter will
94 - marvell,pad-type:
96   Only valid when "marvell,armada-3700-sdhci" is selected.
97   Two types: "sd" and "fixed-1-8v".
100   If "fixed-1-8v" is selected, SoC PHY PAD is fixed 1.8V, such as for eMMC.
101   Please follow the examples with compatible "marvell,armada-3700-sdhci"
105 - For eMMC:
107 	sdhci@aa0000 {
108 		compatible = "marvell,armada-ap806-sdhci";
112 		clock-names = "core", "axi";
113 		bus-width = <4>;
114 		marvell,xenon-phy-slow-mode;
115 		marvell,xenon-tun-count = <11>;
116 		non-removable;
117 		no-sd;
118 		no-sdio;
123 - For SD/SDIO:
125 	sdhci@ab0000 {
126 		compatible = "marvell,armada-cp110-sdhci";
129 		vqmmc-supply = <&sd_vqmmc_regulator>;
130 		vmmc-supply = <&sd_vmmc_regulator>;
132 		clock-names = "core", "axi";
133 		bus-width = <4>;
134 		marvell,xenon-tun-count = <9>;
137 - For eMMC with compatible "marvell,armada-3700-sdhci":
139 	sdhci@aa0000 {
140 		compatible = "marvell,armada-3700-sdhci";
145 		clock-names = "core";
146 		bus-width = <8>;
147 		mmc-ddr-1_8v;
148 		mmc-hs400-1_8v;
149 		non-removable;
150 		no-sd;
151 		no-sdio;
155 		marvell,pad-type = "fixed-1-8v";
158 - For SD/SDIO with compatible "marvell,armada-3700-sdhci":
160 	sdhci@ab0000 {
161 		compatible = "marvell,armada-3700-sdhci";
165 		vqmmc-supply = <&sd_regulator>;
168 		clock-names = "core";
169 		bus-width = <4>;
171 		marvell,pad-type = "sd";