Lines Matching +full:regulator +full:- +full:max +full:- +full:step +full:- +full:microvolt
4 integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators,
6 The RN5T618/RC5T619 provides additionally a Li-ion battery charger,
11 - compatible: must be one of
15 - reg: the I2C slave address of the device
18 - interrupts: interrupt mapping for IRQ
19 See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
20 - system-power-controller:
21 See Documentation/devicetree/bindings/power/power-controller.txt
23 Sub-nodes:
24 - regulators: the node is required if the regulator functionality is
25 needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4
28 LDO7-10 are specific to RC5T619.
29 The common bindings for each individual regulator can be found in:
30 Documentation/devicetree/bindings/regulator/regulator.txt
37 interrupt-parent = <&gpio5>;
39 system-power-controller;
43 regulator-min-microvolt = <1050000>;
44 regulator-max-microvolt = <1050000>;
48 regulator-min-microvolt = <1175000>;
49 regulator-max-microvolt = <1175000>;