Lines Matching +full:regulator +full:- +full:max +full:- +full:microamp
3 DA9093 consists of a large and varied group of sub-devices (I2C Only):
6 ------ ------------ -----------
7 da9063-regulator : : LDOs & BUCKs
8 da9063-onkey : : On Key
9 da9063-rtc : : Real-Time Clock (DA9063 only)
10 da9063-watchdog : : Watchdog
16 - compatible : Should be "dlg,da9063" or "dlg,da9063l"
17 - reg : Specifies the I2C slave address (this defaults to 0x58 but it can be
19 - interrupts : IRQ line information.
20 - interrupt-controller
22 Sub-nodes:
24 - regulators : This node defines the settings for the LDOs and BUCKs.
45 The component follows the standard regulator framework and the bindings
46 details of individual regulator device can be found in:
47 Documentation/devicetree/bindings/regulator/regulator.txt
49 - rtc : This node defines settings for the Real-Time Clock associated with
51 no entries in this binding, however compatible = "dlg,da9063-rtc" should
54 - onkey : This node defines the OnKey settings for controlling the key
56 with the value "dlg,da9063-onkey".
60 - dlg,disable-key-power : Disable power-down using a long key-press. If this
62 press. If this entry does not exist then by default the key-press
66 - watchdog : This node defines settings for the Watchdog timer associated
68 binding, however compatible = "dlg,da9063-watchdog" should be added
77 interrupt-parent = <&gpio6>;
79 interrupt-controller;
82 compatible = "dlg,da9063-rtc";
86 compatible = "dlg,da9063-watchdog";
90 compatible = "dlg,da9063-onkey";
91 dlg,disable-key-power;
96 regulator-name = "BCORE1";
97 regulator-min-microvolt = <300000>;
98 regulator-max-microvolt = <1570000>;
99 regulator-min-microamp = <500000>;
100 regulator-max-microamp = <2000000>;
101 regulator-boot-on;
104 regulator-name = "LDO_11";
105 regulator-min-microvolt = <900000>;
106 regulator-max-microvolt = <3600000>;
107 regulator-boot-on;