Lines Matching full:properties
3 Required properties:
16 Optional properties:
26 Optional submodule and their properties:
38 Following are properties which is needed if GPIO and pinmux functionality
40 Required properties:
46 Optional properties:
48 Following properties are require if pin control setting is required
52 - pinctrl[0...n]: Properties to contain the phandle that refer to
61 Each subnode have following properties:
62 Required properties:
63 - pins: List of pins. Valid values of pins properties are:
67 Optional properties:
71 Valid values for function properties are:
84 Following are properties of regulator subnode.
86 Optional properties:
88 The input supply of regulators are the optional properties on the
90 through following properties:
109 of standard properties for these sub-nodes.
110 Additional optional custom properties are listed below.
112 this properties will tell which external input is
128 The device node should have the following properties to enable this