Lines Matching full:flash
1 * Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
4 asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
7 of the flash chip. The switch is controlled with pin control.
12 - flen-gpios : Must be device tree identifier of the flash device FL_EN pin.
13 - enset-gpios : Must be device tree identifier of the flash device EN_SET pin.
27 - flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
28 Maximum flash LED supply current can be calculated using
30 - flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
31 Maximum flash timeout can be calculated using following
60 flash-max-microamp = <1012500>;
61 flash-max-timeout-us = <1940000>;
66 camera_flash_host: camera-flash-host {
72 camera_flash_isp: camera-flash-isp {