Lines Matching full:priority

7   C64X+ core. Priority 0 and 1 are used for reset and NMI respectively.
8   Priority 2 and 3 are reserved. Priority 4-15 are used for interrupt
18   Single cell specifying the core interrupt priority level (4-15) where
19   4 is highest priority and 15 is lowest priority.
37   One for each core interrupt priority level. In addition to the combined
50                 The cells contain the core priority interrupt to which the
56                              priority interrupts. The first cell corresponds to
57                              core priority 4 and the last cell corresponds to
58                              core priority 15. The value of each cell is the
70   be the core priority level, not the megamodule interrupt number.
101   mapped directly to core priority interrupt 8. The node using this interrupt