Lines Matching +full:pinctrl +full:- +full:bindings

4 - compatible: must be "sis,9200-ts"
5 - reg: i2c slave address
6 - interrupts: touch controller interrupt (see interrupt
10 - pinctrl-names: should be "default" (see pinctrl binding [1]).
11 - pinctrl-0: a phandle pointing to the pin settings for the
12   device (see pinctrl binding [1]).
13 - attn-gpios: the gpio pin used as attention line
14 - reset-gpios: the gpio pin used to reset the controller
15 - wakeup-source: touchscreen can be used as a wakeup source
17 [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
18 [1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
23 		compatible = "sis,9200-ts";
25 		pinctrl-names = "default";
26 		pinctrl-0 = <&pinctrl_sis>;
27 		interrupt-parent = <&gpio3>;
29 		irq-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
30 		reset-gpios = <&gpio2 30 GPIO_ACTIVE_LOW>;