Lines Matching +full:touchscreen +full:- +full:inverted +full:- +full:x
1 Bindings for EETI touchscreen controller
4 - compatible: should be "eeti,exc3000-i2c"
5 - reg: I2C address of the chip. Should be set to <0xa>
6 - interrupts: interrupt to which the chip is connected
9 - attn-gpios: A handle to a GPIO to check whether interrupt is still
11 support for level-triggered IRQs.
13 The following optional properties described in touchscreen.txt are
16 - touchscreen-inverted-x
17 - touchscreen-inverted-y
18 - touchscreen-swapped-x-y
22 i2c-master {
23 touchscreen@a {
24 compatible = "eeti,exc3000-i2c";
26 interrupt-parent = <&gpio>;
28 attn-gpios = <&gpio 123 GPIO_ACTIVE_HIGH>;