Lines Matching +full:touchscreen +full:- +full:y +full:- +full:mm
4 - compatible: must be "elan,ekth3000".
5 - reg: I2C address of the chip.
6 - interrupts: interrupt to which the chip is connected (see interrupt
10 - wakeup-source: touchpad can be used as a wakeup source.
11 - pinctrl-names: should be "default" (see pinctrl binding [1]).
12 - pinctrl-0: a phandle pointing to the pin settings for the device (see
14 - vcc-supply: a phandle for the regulator supplying 3.3V power.
15 - elan,trackpoint: touchpad can support a trackpoint (boolean)
16 - elan,clickpad: touchpad is a clickpad (the entire surface is a button)
17 - elan,middle-button: touchpad has a physical middle button
18 - elan,x_traces: number of antennas on the x axis
19 - elan,y_traces: number of antennas on the y axis
20 - some generic touchscreen properties [2]:
21 * touchscreen-size-x
22 * touchscreen-size-y
23 * touchscreen-x-mm
24 * touchscreen-y-mm
27 [0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
28 [1]: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
29 [2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt
38 interrupt-parent = <&gpio4>;
40 wakeup-source;